new sub, built to fit

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Thanks guys. The fire did get a tad warm !!

but seriously, this finish is pretty easy to do, its a proprietory spray can.
http://www.plastikote.com/plastikote/homefash/template.jsp?searchcode=DEC&product=Cracklin

procedure:
undercoat first.

try to work with the surface horizontal

use a spray can for the undercolour (some cheaper cans don't work, but any of the Automotive type can sprays will. something to do with the solvents used I guess.)

then use the spray in the link, thick and even will give a good wide crackle effect. this is the tricky part, getting it thick and even

then spray coat 2 or 3 of spray clears

never use brush on enamel undercolour or clears, only sprays !!!
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.