new sub, built to fit

[Andy G]

Just about completed the sub to go with the Jays http://members.optusnet.com.au/~gradds55/ARGOS/Jay's.html

the bottom part is the sub, the top part is a cupboard.
The whole sits on a 2.5ft tall concrete shelf.

Sub driver is Peerless 850845, with 200w SSS amp from WES.
box is 50 litres sealed

http://members.optusnet.com.au/~gradds55/jays_sub.jpg

[Cal Weldon]

But, but Andy, it's... it's kinda square.

Nice job as usual.

[Andersonix]

Darn valiant of you to rescue those cabinets from the fire.

[roddyama]

Andy,

Those look great.

Regarding the covering, is that some rare wood veneer of some sort of lizard skin?

[Andy G]

Thanks guys. The fire did get a tad warm !!

but seriously, this finish is pretty easy to do, its a proprietory spray can.
http://www.plastikote.com/plastikote...oduct=Cracklin

procedure:
undercoat first.

try to work with the surface horizontal

use a spray can for the undercolour (some cheaper cans don't work, but any of the Automotive type can sprays will. something to do with the solvents used I guess.)

then use the spray in the link, thick and even will give a good wide crackle effect. this is the tricky part, getting it thick and even

then spray coat 2 or 3 of spray clears

never use brush on enamel undercolour or clears, only sprays !!!