diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Multi-Way (http://www.diyaudio.com/forums/multi-way/)
-   -   Morel MDT-44 Voice Coil (http://www.diyaudio.com/forums/multi-way/117874-morel-mdt-44-voice-coil.html)

PDude 21st February 2008 06:34 AM

Morel MDT-44 Voice Coil
 
Trying to replace the voice coils after an overzealous 25 yr old used the car.

I need a ferrofluid 101 primer. I assume that is the black/gray stuff is on top of the magnet. How does this stuff stay out of the voice coil gap, or does it matter?? The little white felt circle just rests on the top of the magnet, with nothing holding it on? Is the ferrofluid all it's cracked up be?

Should I just stick on the replacement assembly and wire it up?

PDude 22nd February 2008 07:16 AM

Ok, had a little time to do some checking.

The ferrofluid is supposed to be in the gap, I thought it would drag or slow down the coil. So does the fluid on top of the magnet need to go back in the gap, and how.

The felt piece should glued back onto the magnet?


All times are GMT. The time now is 09:32 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2