Go Back   Home > Forums > Loudspeakers > Multi-Way
Home Forums Rules Articles Store Gallery Blogs Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Multi-Way Conventional loudspeakers with crossovers

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 23rd January 2008, 07:50 AM   #1
focal7C is offline focal7C  Australia
diyAudio Member
 
Join Date: Jan 2008
Default Specs for Focal 7C013 woofer and T121 tweeter?

Does anybody know where I can find the specs for a Focal 7C013 woofer and a Focal T121 tweeter?

I have embarked on a speaker refurbishing project and planned to get some crossovers specifically designed.

The current crossovers are away from the cabinet, however the previous owner must have run out of funds/diligence because some cheap J-Car ones were used.

The inside dimensions of the box are 623mm high x 198mm wide x 241mm deep. The inside is lined with lined with 13mm bituminised panels on all surfaces. The steel port is 65mm wide 80 mm deep (made of very thin metal) with the lower edge located about 3-4 cm from the bottom.

The outside measurements are: 1243mm high x 265 wide x 31 deep. It is made of 35m particle board and each box weighs about 40kg.
  Reply With Quote
Old 5th February 2008, 11:57 AM   #2
focal7C is offline focal7C  Australia
diyAudio Member
 
Join Date: Jan 2008
In the absence of specs I have tried to determine what they might be as follows.

The volume of the enclosure is 1 cubic foot.

Assuming this was the optimum volume calculated, I plugged in the other available Focal 7 woofers specs into multiplier graphs and calculations.

The 7v013 came out exactly at 1 cu. f. in obtaining the "optimum volume". Ref: Building speaker systems - Speakers for your listening pleasure; by Gordon McComb, Alvis J. Evans, Eric J. Evans.

Qts = .344
Vas = 51 litres = 1.8 cubic feet
Fs = 40.4 Hz
Tuning frequency = 39.6 Hz

I.e.
Volume multiplier for this Qts is 0.56
The optimum volume is therefore 0.56 x 1.8 = 1

Tuning frequency factor for this Qts is 0.98
Tuning frequency is therefore 0.98 x 40.4 = 39.6
  Reply With Quote

Reply


Hide this!Advertise here!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Focal T121 tweeter polarity focal7C Multi-Way 0 14th February 2008 03:54 AM
Focal 6V013L specs? smdubovsky Multi-Way 0 13th December 2007 04:39 PM
Focal 5N412 DB specs? arjen Multi-Way 1 3rd September 2007 10:48 PM
Focal driver specs??? BigSmooth Multi-Way 0 23rd July 2005 09:26 AM
mid/woofer between eton and focal? hyl2369 Multi-Way 0 5th May 2005 06:20 PM


New To Site? Need Help?

All times are GMT. The time now is 08:17 PM.

Page generated in 0.07191 seconds (73.67% PHP - 26.33% MySQL) with 10 queries

Copyright ©1999-2012 diyAudio