diyAudio (
-   Multi-Way (
-   -   BMS 4550 or B&C DE25? (

pk 5th January 2008 08:39 PM

BMS 4550 or B&C DE25?

I consider getting a 1" driver to be used above 1000 Hz in a home hifi horn rig (not PA). I have looked especially at the BMS 4550 and the B&C DE25 driver, but have not had a chance to hear any of them. Based on the reports I have read and the specs, I tend to lean towards the BMS. However, I already have a BMS 4592 ND and I find it somewhat harsh sounding. And I don't want another driver sounding like that one in the treble!

So, I would really like to hear from anyone who have had a chance to compare the BMS 4550 to the BMS 4590/4592 ND and can tell about how these drivers compare in the treble.

I would also very much like to hear from people who have had a chance to compare the BMS 4550 with the B&C DE25 driver!

Thanks a lot!

Kind regards

DUC985 5th January 2008 10:18 PM

two years ago i was also considering either the BMS or the B&C DE25.
According to some German DIY magazines the DE25 was one of the best and most linear high frequency drivers ever measured and tested.
I went to my loudspeaker dealer and he also recommeded the B&C.
So i bought them and are very happy with them. Very smooth and easy to crossover. I'm running them on a small tractrix >5000Hz as tweeter.

pk 6th January 2008 11:40 AM

Hi DUC985,

Thank you very much for your reply! May I ask what tractrix horn you are using, and have you had a chance to measure your response with the B&C in these? Thanks!

Kind regards

All times are GMT. The time now is 12:25 AM.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2015 DragonByte Technologies Ltd.
Copyright 1999-2015 diyAudio

Content Relevant URLs by vBSEO 3.3.2