Inifinity Speaker Replacement

N-Brock · 16th December 2007, 10:06 PM

A friend brought me an old Infinity Speaker, the drivers need to be replaced and I cannot find the make/model. I went on the website and nothing there resembled what I have. Any help would be most appreciated. [IMG]

[/IMG]

KP11520 · 16th December 2007, 11:47 PM

Hello,

Look here if someone has an idea of which model!

If not, keep looking here until you find it!

It looks like they are from the 70s before the EMIT, maybe early 80s.

Forget about replacing the Drivers! You will never find them. Infinity has so many models and they just don't stock or support things from that far back! First, make sure the drivers are original and if so, have them re-edged (re-foamed). Make sure the crossover is working properly and the binding posts and wiring is all done with quality wire and soldering.

Then if the grills need to be redone, finish them and then listen! Hopefully, they will be worth it!

Regards//Keith

crs1 · 17th December 2007, 04:22 AM

Quote:

Originally posted by KP11520
Hello,

Look here if someone has an idea of which model!

If not, keep looking here until you find it!

It looks like they are from the 70s before the EMIT, maybe early 80s.

Forget about replacing the Drivers! You will never find them. Infinity has so many models and they just don't stock or support things from that far back! First, make sure the drivers are original and if so, have them re-edged (re-foamed). Make sure the crossover is working properly and the binding posts and wiring is all done with quality wire and soldering.

Then if the grills need to be redone, finish them and then listen! Hopefully, they will be worth it!

Regards//Keith

yes you are right it might be hard to locate if at all replacements i don't know how handy you are but if you look in partsexpress.com under speaker repair thay have surround repair kits if you are able it might be cheaper to do it your self to get them up and running check it out if you haven't all ready

KP11520 · 17th December 2007, 04:46 AM

Hi,

I neglected to post the hyperlink I was referring ro. Here it is: http://www.infinitysystems.com/home/...USA&Country=US

Identifying the model number is KEY!

Regards//Keith

16th December 2007, 10:06 PM	#1
N-Brock diyAudio Member Join Date: Oct 2007 Location: Cambridge, MA	Inifinity Speaker Replacement A friend brought me an old Infinity Speaker, the drivers need to be replaced and I cannot find the make/model. I went on the website and nothing there resembled what I have. Any help would be most appreciated. [IMG][/IMG]

16th December 2007, 11:47 PM	#2
KP11520 diyAudio Member Join Date: Apr 2007	Hello, Look here if someone has an idea of which model! If not, keep looking here until you find it! It looks like they are from the 70s before the EMIT, maybe early 80s. Forget about replacing the Drivers! You will never find them. Infinity has so many models and they just don't stock or support things from that far back! First, make sure the drivers are original and if so, have them re-edged (re-foamed). Make sure the crossover is working properly and the binding posts and wiring is all done with quality wire and soldering. Then if the grills need to be redone, finish them and then listen! Hopefully, they will be worth it! Regards//Keith __________________ If Wile E. Coyote had enough money to buy all that ACME ****, why didn't he just buy dinner?

17th December 2007, 04:46 AM	#4
KP11520 diyAudio Member Join Date: Apr 2007	Hi, I neglected to post the hyperlink I was referring ro. Here it is: http://www.infinitysystems.com/home/...USA&Country=US Identifying the model number is KEY! Regards//Keith __________________ If Wile E. Coyote had enough money to buy all that ACME ****, why didn't he just buy dinner?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Speaker Transducers replacement	AB Saadan	Multi-Way	1	18th July 2008 03:42 PM
Silvertone replacement speaker	Ron E	Instruments and Amps	3	29th May 2008 11:31 AM
Speaker replacement possiblities	Jackal2k3	Multi-Way	6	1st August 2006 07:39 PM
replacement speaker	Dave Jones	Multi-Way	1	4th August 2003 05:22 PM
rtr speaker replacement	kspeng	Multi-Way	0	24th May 2003 01:44 AM


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read