Audax Hm210z0

RAYSIMMONS · 11th December 2007, 08:50 AM

Could a HM210Z0 be used in a Demetri / Monolith enclosure?

Thanks.

sdclc126 · 12th December 2007, 03:57 AM

Do you have links to the driver and enclosure?

RAYSIMMONS · 12th December 2007, 05:58 AM

Link to the enclosure.

http://homepage.mac.com/tlinespeaker...map-011207.pdf

RAYSIMMONS · 12th December 2007, 06:34 AM

Driver specs.

Z = 8 ohms
Fs = 30 Hz
P = 70 watts
E = 91 dB
Re = 6.3 ohms
Xmax = 4.25 mm
Qms = 6.45
Qes = 0.32
Qts = 0.31
S = 230 cm2
Vas = 108 liters
Lbm = 0.47 mH

AndrewT · 12th December 2007, 07:39 AM

Hi,
I don't know the cabinet you're planning to use, but the Zo can sound bass light due to parameters being optimised for higher efficiency.
The Co goes about half an octave lower, but in a bigger box.

Have you got a source for these Audax drivers? I thought Audax had pulled out of the market.

sreten · 12th December 2007, 11:16 AM

Hi,

Given the Audax specs, and the FE207E specs and the FR8 specs,
I cannot see why not if both the FE207E and FR8 work well. Maybe
Fs is a little low and you'd need to lengthen the port somewhat.

/sreten.

Netlist · 25th December 2007, 04:39 PM

Thread split, and here's the other part:
Audax Hm210z0

/Hugo

11th December 2007, 08:50 AM	#1
RAYSIMMONS diyAudio Member Join Date: Feb 2002 Location: CLEVELAND OHIO	Audax Hm210z0 Could a HM210Z0 be used in a Demetri / Monolith enclosure? Thanks. __________________ BIG POPA

12th December 2007, 03:57 AM	#2
sdclc126 diyAudio Member Join Date: Jan 2005 Location: San Diego, CA	Do you have links to the driver and enclosure? __________________ Soft Dome

12th December 2007, 05:58 AM	#3
RAYSIMMONS diyAudio Member Join Date: Feb 2002 Location: CLEVELAND OHIO	Link to the enclosure. http://homepage.mac.com/tlinespeaker...map-011207.pdf __________________ BIG POPA

12th December 2007, 06:34 AM	#4
RAYSIMMONS diyAudio Member Join Date: Feb 2002 Location: CLEVELAND OHIO	Driver specs. Z = 8 ohms Fs = 30 Hz P = 70 watts E = 91 dB Re = 6.3 ohms Xmax = 4.25 mm Qms = 6.45 Qes = 0.32 Qts = 0.31 S = 230 cm2 Vas = 108 liters Lbm = 0.47 mH __________________ BIG POPA

12th December 2007, 07:39 AM	#5
AndrewT diyAudio Member Join Date: Jul 2004 Location: Scottish Borders	Hi, I don't know the cabinet you're planning to use, but the Zo can sound bass light due to parameters being optimised for higher efficiency. The Co goes about half an octave lower, but in a bigger box. Have you got a source for these Audax drivers? I thought Audax had pulled out of the market. __________________ regards Andrew T.


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

12th December 2007, 11:16 AM	#6
sreten diyAudio Member Join Date: Nov 2003 Location: Brighton UK	Hi, Given the Audax specs, and the FE207E specs and the FR8 specs, I cannot see why not if both the FE207E and FR8 work well. Maybe Fs is a little low and you'd need to lengthen the port somewhat. /sreten.

25th December 2007, 04:39 PM	#7
Netlist diyAudio Moderator Join Date: Jan 2003	Thread split, and here's the other part: Audax Hm210z0 /Hugo

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Audax Hm210z0	dholcombe	Swap Meet	3	14th June 2010 12:05 AM
FS: Morel MDT33, Audax HM210Z0-HM130Z0, Jordan JX92s,JX150, Aurum Cantus G2se.	konstantin	Swap Meet	27	27th March 2007 02:17 AM
Wanted : Audax HM210Z0	cliffy	Swap Meet	0	18th February 2005 08:39 PM
son audax	sma	Multi-Way	0	27th December 2003 11:40 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read