Crossover for Aurum Cantus & Audax

bizza · 30th October 2007, 01:48 AM

so I bought these drivers initially intending to do a 3 way fronstage in my car, but car plans have changed, I no longer have use for these drivers.... Ive been wanting to get into home audio for quite some time, as this seems like a good opportunity.
Here are the drivers I have:

Aurum Cantus G2 Tweeters
http://www.partsexpress.com/pe/showd...number=276-402

Audax HM100C0 4" Carbon Fiber Cone Woofer
http://www.madisound.com/catalog/pro...roducts_id=101

At this point, I know about car audio, but not much at all about home audio. What are your recommendations?

Fast1one · 30th October 2007, 06:33 AM

With such a low FS you could probably put them in a BIB pipe horn, these days you can make almost anything work from what I see

Look in the full range forum for details (a huge thread) and spreadsheets to design your own, of course with such a low Qts you may need some series resistance..

Good luck!

Edit: Sorry totally disregarded your question, or read it wrong, I thought you were asking for enclosure recommendations

Best crossover is no crossover in my opinion...or a very minor one, if you can biamp, don't hesitate to do so...

bizza · 31st October 2007, 10:16 PM

hey man, I remember you from another forum, actually I bought something recently from you, maybe diyma??

Anyways, I havent decided on an amp yet, so I guess I could go active with them....

bizza · 5th November 2007, 10:18 PM

Well I have a pari of Dayton RS180 woofers id like to use.

So, I figure I could build a 3 way tower with these drivers:

Aurum Cantus G2 Ribbon tweeters
Audax 4" Carbon midrange
Dayton RS180 (4 ohm) woofers

I would like to build my own crossovers. Could you guys point me in the right direction to get started in crossover design and building?
I have the time and willingness to read and learn

rinx · 6th November 2007, 07:35 AM

Start from here>
http://www.rjbaudio.com/Audiofiles/FRDtools.html

30th October 2007, 01:48 AM	#1
bizza diyAudio Member Join Date: Aug 2007	Crossover for Aurum Cantus & Audax so I bought these drivers initially intending to do a 3 way fronstage in my car, but car plans have changed, I no longer have use for these drivers.... Ive been wanting to get into home audio for quite some time, as this seems like a good opportunity. Here are the drivers I have: Aurum Cantus G2 Tweeters http://www.partsexpress.com/pe/showd...number=276-402 Audax HM100C0 4" Carbon Fiber Cone Woofer http://www.madisound.com/catalog/pro...roducts_id=101 At this point, I know about car audio, but not much at all about home audio. What are your recommendations?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FS Audax pr170m0 & Aurum Cantus Ribbons	woody	Swap Meet	7	12th April 2008 06:04 PM
FS: Morel MDT33, Audax HM210Z0-HM130Z0, Jordan JX92s,JX150, Aurum Cantus G2se.	konstantin	Swap Meet	27	27th March 2007 02:17 AM
FS Aurum Cantus, JBL,Jordan,Audax,Radioshack drivers	woody	Swap Meet	8	6th January 2007 10:52 AM
Is Aurum Cantus same as Audax	mp006ltk	Multi-Way	2	12th September 2005 11:44 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

30th October 2007, 06:33 AM	#2
Fast1one diyAudio Member Join Date: Sep 2006	With such a low FS you could probably put them in a BIB pipe horn, these days you can make almost anything work from what I see Look in the full range forum for details (a huge thread) and spreadsheets to design your own, of course with such a low Qts you may need some series resistance.. Good luck! Edit: Sorry totally disregarded your question, or read it wrong, I thought you were asking for enclosure recommendations Best crossover is no crossover in my opinion...or a very minor one, if you can biamp, don't hesitate to do so...

31st October 2007, 10:16 PM	#3
bizza diyAudio Member Join Date: Aug 2007	hey man, I remember you from another forum, actually I bought something recently from you, maybe diyma?? Anyways, I havent decided on an amp yet, so I guess I could go active with them....

5th November 2007, 10:18 PM	#4
bizza diyAudio Member Join Date: Aug 2007	Well I have a pari of Dayton RS180 woofers id like to use. So, I figure I could build a 3 way tower with these drivers: Aurum Cantus G2 Ribbon tweeters Audax 4" Carbon midrange Dayton RS180 (4 ohm) woofers I would like to build my own crossovers. Could you guys point me in the right direction to get started in crossover design and building? I have the time and willingness to read and learn

6th November 2007, 07:35 AM	#5
rinx diyAudio Member Join Date: Sep 2007	Start from here> http://www.rjbaudio.com/Audiofiles/FRDtools.html

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)