Go Back   Home > Forums > Loudspeakers > Multi-Way

Multi-Way Conventional loudspeakers with crossovers

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 12th February 2003, 04:54 AM   #1
diyAudio Member
 
Join Date: Dec 2001
Location: SIUE, Illinois, USA
Default quick questions

ok, if a speaker is placed within 4" of a monitor, i should definately use a sheilded one, right?

next, the hard one:

what is desirable when matching speakers for a bi-amped setup using a 4th order crossover (linkwitz riley is my choice). also, i had thoght of placeing on crossover point at 1.8kHz, but was afraid that would be bad.

i'll have more info later, homework now...
__________________
if only it could be used for good, not evil...
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Quick SMD resistor questions spooney Car Audio 3 30th January 2008 01:30 AM
2 quick SI questions Decker Class D 2 26th November 2007 11:30 PM
Few Really Quick Pass Amp Questions JPeitzman Pass Labs 30 17th September 2007 08:54 PM
2 quick questions JPeitzman Chip Amps 7 22nd July 2007 05:27 PM
2 quick questions Lowjacker Car Audio 3 8th July 2006 03:32 AM


New To Site? Need Help?

All times are GMT. The time now is 08:27 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2