Currently I have a monitor of Accuton C92 & C23 which is quite satisfactory in mid en high.
I want to improve the lowfreq. performance and increase the rendement.
My plan is to add 2 Seas L22RN4X to each speaker which will perform in a 50 liter ported enclosure upto about 250 hz (partly depends on bafflestep freq) 4 channels of UCD400 are available and low - mid will be filtered active.
The speaker mustn't be bigger than 110 * 25 * 50 cm so I'm not considering larger units.
Is there anything that I've overlooked, any lsdrivers that i've missed or anything usefull at all?
thanks in advance!
I want to improve the lowfreq. performance and increase the rendement.
My plan is to add 2 Seas L22RN4X to each speaker which will perform in a 50 liter ported enclosure upto about 250 hz (partly depends on bafflestep freq) 4 channels of UCD400 are available and low - mid will be filtered active.
The speaker mustn't be bigger than 110 * 25 * 50 cm so I'm not considering larger units.
Is there anything that I've overlooked, any lsdrivers that i've missed or anything usefull at all?
thanks in advance!
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.