|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Multi-Way Conventional loudspeakers with crossovers |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
20th October 2007, 08:29 PM
|
#1 |
|
diyAudio Member
Join Date: Dec 2005
Location: Lekkerkerk
|
3way design
Currently I have a monitor of Accuton C92 & C23 which is quite satisfactory in mid en high.
I want to improve the lowfreq. performance and increase the rendement. My plan is to add 2 Seas L22RN4X to each speaker which will perform in a 50 liter ported enclosure upto about 250 hz (partly depends on bafflestep freq) 4 channels of UCD400 are available and low - mid will be filtered active. The speaker mustn't be bigger than 110 * 25 * 50 cm so I'm not considering larger units. Is there anything that I've overlooked, any lsdrivers that i've missed or anything usefull at all? thanks in advance!
__________________
hypex UcD400 HG - Accuton C23 & 92 - Dayton RSS or Peerless SLS in dipole |
|
|
20th October 2007, 09:40 PM
|
#2 |
|
diyAudio Member
Join Date: May 2007
|
Another interesting driver, witch I am contemplating for my 3-way, is the Visaton TIW 200XS.
__________________
"In a world gone mad, only a lunatic is truly insane..." - H.J.S. |
|
|
|
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Modulus 3way | Jamesuk1 | Multi-Way | 5 | 20th April 2008 04:49 AM |
| 3way with bandpass sub | tinitus | Multi-Way | 29 | 9th August 2007 03:01 PM |
| 2.5 or 3way | deki | Multi-Way | 13 | 18th July 2007 02:33 PM |
| Help with 3way design, noob at home audio. | demon2091tb | Multi-Way | 5 | 3rd November 2006 08:59 PM |
| New To Site? | Need Help? |
