2 way with HF horn and 10-12" LF - Page 5

Inductor · 17th October 2007, 11:30 PM

Quote:

Originally posted by AudioGeek
ribbon drivers like which ones?

Do you want a ribbon or a CD?

kepa1 · 19th October 2007, 12:57 PM

Fosti, I need your email adress to send you the PDF, It's a 4 page article with pics and graphs and it weighs 3Mo. I've re-read it, it's quite detailled and favorable, and it's by Vance Dickason!

BTW Oris horn use the 10LW30 in their entry level design.

A couple of questions for your project:
Do you consider PHL Horns for the JBL clones?
Did you notice the Beyma 112Nd/W? Looks like a good candidate too.

Bye

Fosti · 19th October 2007, 01:31 PM

@ kepa1: you've got mail

Yes the 112ND/W looks nice to but then I come into a pricy region, where I can almost think of original JBL speakers.

I use the PH-230 from PAudio for the clones.
The driver is a 1" SP 120 from: http://ncd296.eden1.netclusive.de/sp...1inch/zoom.htm

>>Scroll down<<

Cheers

AudioGeek · 31st January 2011, 05:17 PM

hey so today i was thinking to myself that a cool horn loaded 2 way or 3 way would be cool with a small el84 based amp. so it got me thinking about it.

soo i came here to diyaudio and did a search and i realized that 3 years ago i had the same idea and started this thread. duh.

anyways... too much thinking and not enough doing.

STILL looking to do a 2 or 3 way horn loaded speaker. Maybe use the Beyma CP380M for top end.

Should I now do a midrange horn? or run the Beyma as low as i can?

low end couple of regular drivers 10 or 12" etc.

Thanks again for all the info.

Brett · 2nd February 2011, 06:40 AM

Well there's a whole heap of possibilities from the Econowave (check out Audiokarma "Econowave" and PE Techtalk "Flex your PCD mettle") designs to start with. There is also a TD15M/CP380M*/QSC WG build on AVS (DL86 is the author) which would easily translate to a 12M for example. Also look on AVS and HTG for Brandon's (moniker = augerpro) No Quarters which are also a 12" 2 way with CD/WG.

I'm also finally getting something done about my 10" + JBL Ewave flare with DE250 and ND1090 (2 pairs) but they will be 3 way with a 15" underneath.

The QSC WG's (-152i) were a replacement part but apparently PE is going to be making knock offs for the DIY market, hopefully available soon.

* a terrific driver, one of my faves.

19th October 2007, 01:31 PM	#43
Fosti diyAudio Member Join Date: Jun 2006	@ kepa1: you've got mail Yes the 112ND/W looks nice to but then I come into a pricy region, where I can almost think of original JBL speakers. I use the PH-230 from PAudio for the clones. The driver is a 1" SP 120 from: http://ncd296.eden1.netclusive.de/sp...1inch/zoom.htm >>Scroll down<< Cheers __________________ "... they don't know what they do." - Thats right, quite often! "... they don't do what they know." - That's right, even more often!!!

31st January 2011, 05:17 PM	#44
AudioGeek diyAudio Member Join Date: Jan 2004 Location: Minnesota	funny thing hey so today i was thinking to myself that a cool horn loaded 2 way or 3 way would be cool with a small el84 based amp. so it got me thinking about it. soo i came here to diyaudio and did a search and i realized that 3 years ago i had the same idea and started this thread. duh. anyways... too much thinking and not enough doing. STILL looking to do a 2 or 3 way horn loaded speaker. Maybe use the Beyma CP380M for top end. Should I now do a midrange horn? or run the Beyma as low as i can? low end couple of regular drivers 10 or 12" etc. Thanks again for all the info. __________________ It is not you... you are it.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Looking for phase plug ideas for horn loaded 10" and 12" drivers	Eva	Multi-Way	10	11th December 2011 05:17 PM
Grill Material for Stan White "Curled" Horn Reproduction	rlabomb	Multi-Way	0	26th May 2008 02:24 PM
Stubby horn vent -"halfhorn"- what can be manipulated?	freddi	Multi-Way	0	21st January 2007 06:56 PM
Horn-loading the "new breed" of pro sound 6.5-8'' drivers	Swedish Chef	Multi-Way	61	28th April 2006 01:01 AM
Data of Isophon DKT11 "Exponential-Hochtonstraler", treble horn	peranders	Multi-Way	3	10th December 2002 08:13 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

19th October 2007, 12:57 PM	#42
kepa1 diyAudio Member Join Date: Apr 2004 Location: Paris	Fosti, I need your email adress to send you the PDF, It's a 4 page article with pics and graphs and it weighs 3Mo. I've re-read it, it's quite detailled and favorable, and it's by Vance Dickason! BTW Oris horn use the 10LW30 in their entry level design. A couple of questions for your project: Do you consider PHL Horns for the JBL clones? Did you notice the Beyma 112Nd/W? Looks like a good candidate too. Bye

2nd February 2011, 06:40 AM	#45
Brett diyAudio Member Join Date: Jan 2002	Well there's a whole heap of possibilities from the Econowave (check out Audiokarma "Econowave" and PE Techtalk "Flex your PCD mettle") designs to start with. There is also a TD15M/CP380M/QSC WG build on AVS (DL86 is the author) which would easily translate to a 12M for example. Also look on AVS and HTG for Brandon's (moniker = augerpro) No Quarters which are also a 12" 2 way with CD/WG. I'm also finally getting something done about my 10" + JBL Ewave flare with DE250 and ND1090 (2 pairs) but they will be 3 way with a 15" underneath. The QSC WG's (-152i) were a replacement part but apparently PE is going to be making knock offs for the DIY market, hopefully available soon. a terrific driver, one of my faves.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)