my proac clones...

Jadde · 10th February 2003, 10:18 AM

Sorry for the big files... Any ideas before I put the XOs in the boxes? Cabinets measure 90 * 20 * 30 (cm)

Rarkov · 10th February 2003, 11:06 AM

Hi...
Look great! How about sanding the inside of the speaker holes?

Gaz

FrankDIY · 10th February 2003, 12:07 PM

Nice job

Jadde · 10th February 2003, 12:28 PM

Thanks!

What do you mean by sanding the holes? To minimise turbulence or?

Jadde · 10th February 2003, 12:30 PM

btw François, nice Totem "clones"

FrankDIY · 10th February 2003, 12:46 PM

Quote:

Originally posted by Jadde
Thanks!

What do you mean by sanding the holes? To minimise turbulence or?

You do a roundover for the edge of the hole (only inside of the box).

Quote:

Originally posted by Jadde
btw François, nice Totem "clones"

Thanks

Someday I will build a ProAc Clone for sure

Zozo · 10th February 2003, 12:53 PM

Hi,

I've put the xo parts on two separated wood panels (one for the LF and the other for the HF filter). The HF filter just fit on the speaker connector assembly.
See it on my site :

http://diyproac25.fw.hu/

Zoltan

Jadde · 10th February 2003, 01:00 PM

Zozo, your clones look great. Nich touch to the filter aswell.

Jadde · 10th February 2003, 08:51 PM

I will compare them to my Primare L25s.

10th February 2003, 10:18 AM	#1
Jadde diyAudio Member Join Date: Jan 2003 Location: .	my proac clones... Sorry for the big files... Any ideas before I put the XOs in the boxes? Cabinets measure 90 * 20 * 30 (cm) __________________ .

10th February 2003, 12:07 PM	#3
FrankDIY diyAudio Member Join Date: Mar 2001 Location: Quebec City	Nice job __________________ Imagination is more important than knowledge. knowledge is limited, imagination encircles the world. Albert Einstein FrankDIY's Audio Corner

10th February 2003, 12:28 PM	#4
Jadde diyAudio Member Join Date: Jan 2003 Location: .	Thanks! What do you mean by sanding the holes? To minimise turbulence or? __________________ .

10th February 2003, 12:30 PM	#5
Jadde diyAudio Member Join Date: Jan 2003 Location: .	btw François, nice Totem "clones" __________________ .

10th February 2003, 01:00 PM	#8
Jadde diyAudio Member Join Date: Jan 2003 Location: .	Zozo, your clones look great. Nich touch to the filter aswell. __________________ .


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

10th February 2003, 11:06 AM	#2
Rarkov diyAudio Member Join Date: Aug 2002 Location: North East, UK	Hi... Look great! How about sanding the inside of the speaker holes? Gaz

10th February 2003, 12:53 PM	#7
Zozo diyAudio Member Join Date: Dec 2002 Location: Hungary	Hi, I've put the xo parts on two separated wood panels (one for the LF and the other for the HF filter). The HF filter just fit on the speaker connector assembly. See it on my site : http://diyproac25.fw.hu/ Zoltan

10th February 2003, 08:51 PM	#9
Jadde diyAudio Member Join Date: Jan 2003 Location: .	I will compare them to my Primare L25s. __________________ .

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Looking to unload my ProAc 2.5 clones.	R-Carpenter	Swap Meet	3	27th January 2008 02:16 AM
Proac 1sc clones on ebay	qguy	Multi-Way	0	25th November 2006 04:43 AM
Proac 2.5 clones in NZ	Munkey	Multi-Way	4	4th December 2005 08:24 AM
FS: Proac 2.5 Clones	UrSv	Swap Meet	0	30th August 2004 12:07 PM
FS: Proac 2.5 clones	MSeddon	Swap Meet	1	16th October 2003 10:28 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read