Hello,
I have 4 Tang Band W4-656SB's that I intend to use for modest surround speakers (1 per enclosure). Modelling in Unibox gives me the following:
Std Design: 3.4 litres with a port of 4.27 cm dia & 94.14 cm length
Design by Vb, Fb & Q: 5.0 litres with a port of 4.04 cm dia & 41.71cm length
Modelling in WinISD gives me 3.0 litres, with a port of 3.81 cm dia & 14.78cm in length...
What box volume/port dimensions should I build to, given these discrepancies??
Thanks for any help.
HTR
I have 4 Tang Band W4-656SB's that I intend to use for modest surround speakers (1 per enclosure). Modelling in Unibox gives me the following:
Std Design: 3.4 litres with a port of 4.27 cm dia & 94.14 cm length
Design by Vb, Fb & Q: 5.0 litres with a port of 4.04 cm dia & 41.71cm length
Modelling in WinISD gives me 3.0 litres, with a port of 3.81 cm dia & 14.78cm in length...
What box volume/port dimensions should I build to, given these discrepancies??
Thanks for any help.
HTR
The first two are way off. I have no idea what you are plugging into that program, but I cannot duplicate your results.
The last one will work, but is perhaps too small and tuned too high, IMO. Make the box 4L and the port 1.5" Dia x ~21cm long (or use a PR) and you should be OK.
The last one will work, but is perhaps too small and tuned too high, IMO. Make the box 4L and the port 1.5" Dia x ~21cm long (or use a PR) and you should be OK.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.