hi,
long shot but does anyone have or happen to know the port sizes for the Tannoy V8 model?
might be able to get my hands on a pair of the drivers, and already have a 19L box (the V8 is 17L) (but with a little modifications 😉 ) then plan to use a 2nd order XO @ 1.7KHz.
Ta 🙂
long shot but does anyone have or happen to know the port sizes for the Tannoy V8 model?
might be able to get my hands on a pair of the drivers, and already have a 19L box (the V8 is 17L) (but with a little modifications 😉 ) then plan to use a 2nd order XO @ 1.7KHz.
Ta 🙂
hi,
http://www.tannoy-speakers.com/s.php?product=38&title=V8&s=1
See the comprehensive downloads section, port tuning is ~ 70Hz.
🙂/sreten.
http://www.tannoy-speakers.com/s.php?product=38&title=V8&s=1
See the comprehensive downloads section, port tuning is ~ 70Hz.
🙂/sreten.
thanks, seen them, but i dont have excel 🙁
any idea how to work out the port size for a 17L box tuned to 70Hz then?
😀
any idea how to work out the port size for a 17L box tuned to 70Hz then?
😀
Hi,
most of the info in excel in in the first PDF.
The design appears to have 4 : 25mm diameter x 50mm long ports.
A single port would be 2.5in dia x 2.5 in long.
Used WinISD to calculate the above.
🙂/sreten.
most of the info in excel in in the first PDF.
The design appears to have 4 : 25mm diameter x 50mm long ports.
A single port would be 2.5in dia x 2.5 in long.
Used WinISD to calculate the above.
🙂/sreten.
- Status
- Not open for further replies.