Calling Andy Graddon off thread

Moondog55 · 15th September 2007, 06:44 AM

Hi Andy, I have aquired a pair of the Jaycr 10 inch carbon fibre bass drivers and as you have recomended them in past threads, I was wondering if you still had the nominal T/S parametres on file??
Pity about Jaycars customer service, I tried to get an Email response ( sorry I could not resist!!) but no luck.
I have the early model either 4 or 8 ohms, still no test gear and I am not paying $45 Aud to have the local speaker repair shop put them on "Woofer Tester"
Thanx Ted

Andy G · 15th September 2007, 07:02 AM

Jaycar 10" carbons... nah, no good at all..

but if you send em here, I'll find some use for them!

btw.... ygm !

Moondog55 · 15th September 2007, 08:14 AM

Thanx Andy, we should all keep a collection of back-catalogues
impressive graph, but mine may be the model before those even
Mine are labelled RW 10 and have that daggy "irresponsible " logo.
8 or 4 R impedance ( 6.5 or 3.5 R)but it is interesting that when I parallel the inputs I still get 3.5 R DC
But it does look like that is the same driver, small sealed box coming up

Andy G · 15th September 2007, 08:58 AM

dual coil?
I seem to remember a 10" with a concave dust cap. A car sub actually, reputedly quite good, but not at all the same as what I was thinking you had. So any comments re SQ are null !!

Will drag out the old cattledogs and see what I can find !!

Moondog55 · 15th September 2007, 09:41 AM

Nope, convex dustcap, similar spider and bump-out with vented voicecoil, just like the little 6inch mid-woofers CS2240.
If they are the same but higher impedance with luck the Qts will be slightly higher

Andy G · 15th September 2007, 10:16 AM

well, if it isn't the one I sent you the info for, its before my collection of cattledogs. sorry I can't help more !!

Moondog55 · 15th September 2007, 11:56 AM

OK, Aussie DIYer's, who's got a collection of old Jaycar catalogues.
It will be a month before my Woofer tester gets here and I don't want to put this in a box that's too big

Andy G · 15th September 2007, 12:01 PM

can you take a couple of pics? maybe I can figure out what it is that way.

Moondog55 · 15th September 2007, 12:20 PM

I found the camera ;Check your in box, YGM
See what you think
Ted

Moondog55 · 15th September 2007, 12:31 PM

If any Aussies reciognise these and have the T/S specs please let me know

15th September 2007, 06:44 AM	#1
Moondog55 diyAudio Member Join Date: Jun 2007 Location: Norlane; Geelong: Victoria: Australia	Calling Andy Graddon off thread Hi Andy, I have aquired a pair of the Jaycr 10 inch carbon fibre bass drivers and as you have recomended them in past threads, I was wondering if you still had the nominal T/S parametres on file?? Pity about Jaycars customer service, I tried to get an Email response ( sorry I could not resist!!) but no luck. I have the early model either 4 or 8 ohms, still no test gear and I am not paying $45 Aud to have the local speaker repair shop put them on "Woofer Tester" Thanx Ted __________________ QUOTE" The more I know, the more I know, I know (insert maniacal laugh >here<) NOTHING"

15th September 2007, 08:14 AM	#3
Moondog55 diyAudio Member Join Date: Jun 2007 Location: Norlane; Geelong: Victoria: Australia	Thanx Andy, we should all keep a collection of back-catalogues impressive graph, but mine may be the model before those even Mine are labelled RW 10 and have that daggy "irresponsible " logo. 8 or 4 R impedance ( 6.5 or 3.5 R)but it is interesting that when I parallel the inputs I still get 3.5 R DC But it does look like that is the same driver, small sealed box coming up __________________ QUOTE" The more I know, the more I know, I know (insert maniacal laugh >here<) NOTHING"

15th September 2007, 09:41 AM	#5
Moondog55 diyAudio Member Join Date: Jun 2007 Location: Norlane; Geelong: Victoria: Australia	Nope, convex dustcap, similar spider and bump-out with vented voicecoil, just like the little 6inch mid-woofers CS2240. If they are the same but higher impedance with luck the Qts will be slightly higher __________________ QUOTE" The more I know, the more I know, I know (insert maniacal laugh >here<) NOTHING"

15th September 2007, 11:56 AM	#7
Moondog55 diyAudio Member Join Date: Jun 2007 Location: Norlane; Geelong: Victoria: Australia	OK, Aussie DIYer's, who's got a collection of old Jaycar catalogues. It will be a month before my Woofer tester gets here and I don't want to put this in a box that's too big __________________ QUOTE" The more I know, the more I know, I know (insert maniacal laugh >here<) NOTHING"

15th September 2007, 12:20 PM	#9
Moondog55 diyAudio Member Join Date: Jun 2007 Location: Norlane; Geelong: Victoria: Australia	I found the camera ;Check your in box, YGM See what you think Ted __________________ QUOTE" The more I know, the more I know, I know (insert maniacal laugh >here<) NOTHING"


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

15th September 2007, 07:02 AM	#2
Andy G diyAudio Member Join Date: Apr 2002 Location: Newcastle, Australia	Jaycar 10" carbons... nah, no good at all.. but if you send em here, I'll find some use for them! btw.... ygm !

15th September 2007, 08:58 AM	#4
Andy G diyAudio Member Join Date: Apr 2002 Location: Newcastle, Australia	dual coil? I seem to remember a 10" with a concave dust cap. A car sub actually, reputedly quite good, but not at all the same as what I was thinking you had. So any comments re SQ are null !! Will drag out the old cattledogs and see what I can find !!

15th September 2007, 10:16 AM	#6
Andy G diyAudio Member Join Date: Apr 2002 Location: Newcastle, Australia	well, if it isn't the one I sent you the info for, its before my collection of cattledogs. sorry I can't help more !!

15th September 2007, 12:01 PM	#8
Andy G diyAudio Member Join Date: Apr 2002 Location: Newcastle, Australia	can you take a couple of pics? maybe I can figure out what it is that way.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY Andy Summers Telecaster - help needed!	mrmorrison	Instruments and Amps	23	15th January 2009 12:08 PM
Andy Mckee, not the first but....	Jonny Hotnuts	Music	1	5th January 2008 07:10 AM
Introduction - Andy from melbourne down under	pezza89	Introductions	2	23rd September 2007 03:57 PM
Andy - series x-over question	Cloth Ears	Multi-Way	0	23rd September 2005 07:21 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read