A question on Dynaudio Tweeters

violator73 · 27th August 2007, 09:44 AM

Hi All

I managed to secured a pair of used Dynaudio Audience 70 speakers at a very low price. However the D260 Esotec tweeters' domes were them are dented. Is it ok that i replaced this pair of Dented Dome tweeters with a pair of new Dynaudio D28/2 tweeters.

Thanks for your help

Regards
Nicholas

willycom · 25th November 2007, 07:30 PM

you can replace them and see what happens as long as your D28 nominal impedance = your 260 nominal impedance.....

i have a friend who liked D28 better than D260...

i know that the freq response and cut off point are slightly different for those 2 tweeters.....so if you want to be perfect, you have to change the crossover a bit (especially if the original crossover has some impedance compensation circuitry in it)...

27th August 2007, 09:44 AM	#1
violator73 diyAudio Member Join Date: Aug 2007	A question on Dynaudio Tweeters Hi All I managed to secured a pair of used Dynaudio Audience 70 speakers at a very low price. However the D260 Esotec tweeters' domes were them are dented. Is it ok that i replaced this pair of Dented Dome tweeters with a pair of new Dynaudio D28/2 tweeters. Thanks for your help Regards Nicholas

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
WTB: Scanspeak or Dynaudio tweeters	snaimpally	Swap Meet	7	15th August 2011 12:43 AM
WTB - Dynaudio D21 Tweeters	sholz64	Swap Meet	0	31st July 2008 09:36 PM
Wanted : Dynaudio d21/2 tweeters	David Gatti	Swap Meet	0	9th January 2006 05:12 AM
looking for Dynaudio D21s tweeters	shaynet	Swap Meet	0	25th January 2004 11:40 PM
FS: Dynaudio D21/2 tweeters	CanuckAP	Swap Meet	5	17th March 2003 05:40 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

25th November 2007, 07:30 PM	#2
willycom diyAudio Member Join Date: Jun 2005 Location: indo	you can replace them and see what happens as long as your D28 nominal impedance = your 260 nominal impedance..... i have a friend who liked D28 better than D260... i know that the freq response and cut off point are slightly different for those 2 tweeters.....so if you want to be perfect, you have to change the crossover a bit (especially if the original crossover has some impedance compensation circuitry in it)...

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)