Audax HT Crossover question

[CamMan595]

About 3 years ago I built the Left, Center, and right speakers from the Audax HT kit. I am very pleased BTW, but that's a post for another day.


On various web sites, there has been an error pointed out about the midrange crossover of the center channel speaker. One site states the following:

When assembling the midrange board, use the schematic shown above and NOT the picture layout on the Audax website. On their picture layout, C2 and L2 are switched.

If you look at the schematic, C2 and L2 are wired in series and have no components between them. I am not an electrician and I am truly wondering, "Does it make a difference if they are in the reverse order?" I have always thought that it does not matter but just in case, I made my crossover the "corrected" way.

[Inductor]

Originally posted by CamMan595
If you look at the schematic, C2 and L2 are wired in series and have no components between them.

In this case no, until some other information on the contrary, maybe aesthetics.