hi,i have recently brought some speakers from a car boot sale,see my earlier post..i'm looking to build some 3-way speakers in the style of wilson watt/puppys,the tweeters are
vifa xt25's
mids are.
vifa xg18wh0008's
and bass will be.seas l22rnx/p
now i want to have a go at building some crossovers,and to be blunt,i haven't got a clue where to start.
can somebody point me in the right direction please..
vifa xt25's
mids are.
vifa xg18wh0008's
and bass will be.seas l22rnx/p
now i want to have a go at building some crossovers,and to be blunt,i haven't got a clue where to start.
can somebody point me in the right direction please..
http://www.deadwaxcafe.com/vzone/david/david.htm
http://www.rjbaudio.com/Audiofiles/FRDtools.html
The XG18 sensitivity is not high enough for the two bass units.
You need to add a trap filter to the L22's.
sreten.
http://www.rjbaudio.com/Audiofiles/FRDtools.html
The XG18 sensitivity is not high enough for the two bass units.
You need to add a trap filter to the L22's.
sreten.
Hi,
You could go active bass/ mid, passive mid/treble with 2 stereo amplifiers. Somewhat easier, design flexibility wise.
Or build this with some mods for the tweeter substitution :
http://www.rjbaudio.com/AlpheusMkII/alpheusmkii.html
Wilmslow Audio design service :
Give all the details of baffle layout and slope from the david /
jericho design. Also specify no BSC on the mid unit and the
bass section must fill in the Baffle step as in the D/J.
Also specify trap filters must be used on bass units.
Mid driver : Seas ER18RNX is your best bet IMO.
/sreten.
You could go active bass/ mid, passive mid/treble with 2 stereo amplifiers. Somewhat easier, design flexibility wise.
Or build this with some mods for the tweeter substitution :
http://www.rjbaudio.com/AlpheusMkII/alpheusmkii.html
Wilmslow Audio design service :
Give all the details of baffle layout and slope from the david /
jericho design. Also specify no BSC on the mid unit and the
bass section must fill in the Baffle step as in the D/J.
Also specify trap filters must be used on bass units.
Mid driver : Seas ER18RNX is your best bet IMO.
/sreten.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.