Xover for 9900 & 8545 - diyAudio
Go Back   Home > Forums > Loudspeakers > Multi-Way

Multi-Way Conventional loudspeakers with crossovers

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 28th January 2003, 02:40 PM   #1
diyAudio Member
 
Join Date: Feb 2002
Location: K
Default Xover for 9900 & 8545

Hi..

I am planning to install SS 9900 + 8545 to the front door of my car.

I searched this forum, but I found some design for other units.
or 2.5 way.

I need 2 way XO design.

Any design or opinion will be helpful.
__________________
... ...
... See the ZeitGeist ?...
  Reply With Quote
Old 29th January 2003, 01:50 AM   #2
diyAudio Member
 
Join Date: Oct 2002
Location: Barrie, Ontario, Canada
mounting them in the door of your car opens up a whole big can o worms. Enclosures are usually incorporated into the design of a crossover. By mounting them in a car door, you may get some nasty resonances or peaks that may need to be tamed with the crossover. Best thing to do is get them in the doors of your vehicle, take some measurements, and builed the crossovers based on the measured values.

I know this doesnt really help much.
__________________
The *** is a muscle that MUST be rested!
  Reply With Quote
Old 29th January 2003, 12:08 PM   #3
diyAudio Member
 
Join Date: Feb 2002
Location: K
Thank you for your advice.

I just want to see the examples which I can get some ideas.

But I don't have any measurement system. So I must do it by my ears.

Thanks...
__________________
... ...
... See the ZeitGeist ?...
  Reply With Quote
Old 29th January 2003, 02:28 PM   #4
Wizard of Kelts
diyAudio Moderator
 
Join Date: Sep 2001
Location: Connecticut, The Nutmeg State
Here is the crossover schematic for the ScanSpeak Reference Monitor, which uses the two drivers you have:
http://www.audiocomponents.nl/speake.../ref-mon_4.htm

Here is the page for all the drawings of the Reference Monitor
http://www.audiocomponents.nl/speake...erence_eng.htm

Spacing between the center of the woofer and the center of the tweeter can affect the response of a crossover. The spacing here is 6 5/8", or 167 mm. Of course, in a car, you cannot control such things, but if the spacing in your vehicle is anything near that, especially less than that, you should be okay.

PS: the above links were originally found by our member Softman and posted in the following thread:
Help with filter for Scan Speak 18W/8545 and D2905/9500 combo.

Anyway, good luck!
Attached Images
File Type: gif scan speak reference monitor schematic.gif (33.1 KB, 290 views)
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
FS: ScanSpeak 18W/8545-00 (pair) mac Swap Meet 2 1st July 2008 01:50 PM
Opinions: SS8531 or 8545 Milzie Multi-Way 6 31st October 2007 11:12 PM
Scanspeak 8545 Perfect Quad & SS 9900 Tweeters Oris642 Swap Meet 2 16th October 2003 05:59 PM
FS: Scanspeak 8545 Perfect Quad & SS 9900 Oris642 Swap Meet 1 27th September 2003 09:49 PM
SS 18W/8545 question Mats J Multi-Way 3 23rd October 2002 09:04 AM


New To Site? Need Help?

All times are GMT. The time now is 02:48 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2