Specs on drivers anyone?

Keltern · 11th June 2007, 10:03 PM

Does anyone have access to specs on the Dali 606 drivers?

This is all the info written on the magnetlabel:

Tweeter: D26TG-47-06

06 Ohm - 703

Bass/midrange: TC18BG08-12

12 Ohm - 707

The support isn't answering any time soon it seems..

planet10 · 12th June 2007, 05:30 AM

The tweeter number sure looks like Vifa, TC18 is also used by Vifa.

dave

phase_accurate · 12th June 2007, 06:00 AM

The Dali woofers are definitley made by Vifa.

Regards

Charles

Keltern · 12th June 2007, 06:27 AM

Yes, I reckoned they were Vifa..

But I can't seem to find anything about them, so can any of you guys try? Tried searching around, but no luck.. So I was hoping you could give it a try!

planet10 · 12th June 2007, 07:32 AM

They are likely OEM drivers made specifically for Dali -- only Tymphany & Dali will have the specs.

dave

Saturnus · 12th June 2007, 08:00 AM

Almost all Dali drivers are OEM VIFA drivers, however the D26TG-47-06 tweeter is very similar to the D26TG-35-06 (http://www.tymphany.com/datasheet/printview.php?id=255)

The woofer I'm afraid doesn't have a directly comparable off-the-shelf version.

Keltern · 12th June 2007, 08:27 AM

Typical.. ^^

Is there anyone on this forum that's known for having a connection to Dali?

I don't want to throw these away, cause I'd rather use them in a little DIY speaker.. I have two sets of 606, and one of them are a bit shabby, so I thought I'd make use of the drivers..

But it seems it's hard to get specs on them, so I don't know what to do...

richie00boy · 12th June 2007, 08:39 AM

Measure them then. You should anyway if you are making a decent job of the project even if you have manufacturer parameters.

rabbitz · 12th June 2007, 08:50 AM

The woofer should be close to this but with a higher impedance curve.

http://www.tymphany.com/datasheet/printview.php?id=290

In Oz we get a PAE 18WG08 which is basically a TC / BC driver.

http://www.digitalmegahouse.com/peer...20speakers.htm

Saturnus · 12th June 2007, 10:49 AM

Quote:

Originally posted by Keltern
Is there anyone on this forum that's known for having a connection to Dali?

Well, I do business with Peter Lyngdorf but I'm not sure he's willing to disclose such information. I can ask at the next oppertune moment though.

11th June 2007, 10:03 PM	#1
Keltern diyAudio Member Join Date: Apr 2007	Specs on drivers anyone? Does anyone have access to specs on the Dali 606 drivers? This is all the info written on the magnetlabel: Tweeter: D26TG-47-06 06 Ohm - 703 Bass/midrange: TC18BG08-12 12 Ohm - 707 The support isn't answering any time soon it seems.. __________________ Keltern

12th June 2007, 05:30 AM	#2
planet10 frugal-phile(tm) diyAudio Moderator Join Date: Oct 2001 Location: Victoria, BC, NA, Sol III Blog Entries: 4	The tweeter number sure looks like Vifa, TC18 is also used by Vifa. dave __________________ community sites t-linespeakers.org, frugal-horn.com ........ commercial site planet10-HiFi p10-hifi forum here at diyA

12th June 2007, 06:27 AM	#4
Keltern diyAudio Member Join Date: Apr 2007	Yes, I reckoned they were Vifa.. But I can't seem to find anything about them, so can any of you guys try? Tried searching around, but no luck.. So I was hoping you could give it a try! __________________ Keltern

12th June 2007, 07:32 AM	#5
planet10 frugal-phile(tm) diyAudio Moderator Join Date: Oct 2001 Location: Victoria, BC, NA, Sol III Blog Entries: 4	They are likely OEM drivers made specifically for Dali -- only Tymphany & Dali will have the specs. dave __________________ community sites t-linespeakers.org, frugal-horn.com ........ commercial site planet10-HiFi p10-hifi forum here at diyA

12th June 2007, 08:27 AM	#7
Keltern diyAudio Member Join Date: Apr 2007	Typical.. ^^ Is there anyone on this forum that's known for having a connection to Dali? I don't want to throw these away, cause I'd rather use them in a little DIY speaker.. I have two sets of 606, and one of them are a bit shabby, so I thought I'd make use of the drivers.. But it seems it's hard to get specs on them, so I don't know what to do... __________________ Keltern


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

12th June 2007, 06:00 AM	#3
phase_accurate diyAudio Member Join Date: May 2002 Location: Switzerland	The Dali woofers are definitley made by Vifa. Regards Charles

12th June 2007, 08:00 AM	#6
Saturnus diyAudio Member Join Date: Jun 2005 Location: Copenhagen, Denmark	Almost all Dali drivers are OEM VIFA drivers, however the D26TG-47-06 tweeter is very similar to the D26TG-35-06 (http://www.tymphany.com/datasheet/printview.php?id=255) The woofer I'm afraid doesn't have a directly comparable off-the-shelf version.

12th June 2007, 08:39 AM	#8
richie00boy Did it Himself diyAudio Member Join Date: Nov 2003 Location: Gloucestershire, England, UK	Measure them then. You should anyway if you are making a decent job of the project even if you have manufacturer parameters. __________________ www.readresearch.co.uk my website for UK diy audio people - designs, PCBs, kits and more

12th June 2007, 08:50 AM	#9
rabbitz diyAudio Member Join Date: Jul 2003 Location: Newcastle, Australia	The woofer should be close to this but with a higher impedance curve. http://www.tymphany.com/datasheet/printview.php?id=290 In Oz we get a PAE 18WG08 which is basically a TC / BC driver. http://www.digitalmegahouse.com/peer...20speakers.htm

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
t/s specs for indian drivers	somakmaitra	Multi-Way	758	24th April 2012 02:38 PM
TS parameters and specs for these drivers???	Bull	Multi-Way	1	9th March 2011 12:15 PM
Matching drivers...beyond the specs	smokinghot	Multi-Way	4	28th January 2009 10:41 AM
need driver specs for raw Bose drivers	Jared	Multi-Way	2	18th November 2002 01:44 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read