pdr or zma file for Neo3

[arc2v]

Does anyone have a pdr or zma file for the Neo3 or Neo3PDR planar tweeter?

Parts Express has nothing, GR-Research has a pdf file with a graph, but no raw data. Google and forum searches came up empty ...

unless I'm searching on the wrong terms.

Anyway, I want to model this in a few of the FRD Consortium tools and this is the one thing holding me up.

Thanks in advance,
A

 

[JonasKarud]

Try this software!

http://www.hometheatershack.com/for...6-new-spl-copy-software-please-help-test.html

 

[DougL]

You can make one if you have to.

Its a pain, but grab another tweeters file, and tweak the values from the pdf.

I believe that's what I did. Its on an old computer, so I would need to get it out of a closet to check.

Doug

 

[arc2v]

that's what I did too. Click, move, click, repeat

A couple places online had repositories of stuff that they tested, but the Neo3PDR was not one of them.

It's not hard to use the manual software, just takes some time. If you have a job with some boring downtime (like waiting for things) it's perfect

 

[JonasKarud]

Use Microsoft Paint and draw a line by hand on a fictive graph, and import the resulting jpg to SPL Copy, the program I referred to above.

 

[rabbitz]

I don't know if this is any good but it's a rough one I traced years ago. Might be of some use.