pdr or zma file for Neo3

arc2v · 24th May 2007, 06:27 PM

Does anyone have a pdr or zma file for the Neo3 or Neo3PDR planar tweeter?

Parts Express has nothing, GR-Research has a pdf file with a graph, but no raw data. Google and forum searches came up empty ...

unless I'm searching on the wrong terms.

Anyway, I want to model this in a few of the FRD Consortium tools and this is the one thing holding me up.

Thanks in advance,
A

JonasKarud · 11th July 2010, 11:44 AM

Try this software!

http://www.hometheatershack.com/foru...help-test.html

DougL · 11th July 2010, 03:20 PM

You can make one if you have to.

Its a pain, but grab another tweeters file, and tweak the values from the pdf.

I believe that's what I did. Its on an old computer, so I would need to get it out of a closet to check.

Doug

arc2v · 12th July 2010, 11:49 AM

that's what I did too. Click, move, click, repeat

A couple places online had repositories of stuff that they tested, but the Neo3PDR was not one of them.

It's not hard to use the manual software, just takes some time. If you have a job with some boring downtime (like waiting for things) it's perfect

JonasKarud · 12th July 2010, 01:55 PM

Use Microsoft Paint and draw a line by hand on a fictive graph, and import the resulting jpg to SPL Copy, the program I referred to above.

rabbitz · 13th July 2010, 08:52 AM

I don't know if this is any good but it's a rough one I traced years ago. Might be of some use.

24th May 2007, 06:27 PM	#1
arc2v diyAudio Member Join Date: May 2007	pdr or zma file for Neo3 Does anyone have a pdr or zma file for the Neo3 or Neo3PDR planar tweeter? Parts Express has nothing, GR-Research has a pdf file with a graph, but no raw data. Google and forum searches came up empty ... unless I'm searching on the wrong terms. Anyway, I want to model this in a few of the FRD Consortium tools and this is the one thing holding me up. Thanks in advance, A

11th July 2010, 03:20 PM	#3
DougL diyAudio Member Join Date: Feb 2004 Location: Wheaton IL. Blog Entries: 28	You can make one if you have to. Its a pain, but grab another tweeters file, and tweak the values from the pdf. I believe that's what I did. Its on an old computer, so I would need to get it out of a closet to check. Doug __________________ Scienta sine ars nihil est - Science without Art is nothing. (Implies the converse as well) Mater tua criceta fuit, et pater tuo redoluit bacarum sambucus

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
.slb file (translated library file)...!	spice freak	Solid State	0	28th October 2008 03:20 PM
FS BG Neo3	mitchyz250f	Swap Meet	4	22nd May 2008 07:27 PM
WTT: BG Neo3 for BG Neo3-PDR	azngotskills	Swap Meet	0	1st December 2007 10:24 PM
File Uploader - php script with file validation	lineup	The Lounge	5	11th February 2007 09:09 AM
Pr. BG Neo3 PDR FS	Ed LaFontaine	Swap Meet	3	2nd July 2005 12:03 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

11th July 2010, 11:44 AM	#2
JonasKarud diyAudio Member Join Date: May 2008	Try this software! http://www.hometheatershack.com/foru...help-test.html

12th July 2010, 11:49 AM	#4
arc2v diyAudio Member Join Date: May 2007	that's what I did too. Click, move, click, repeat A couple places online had repositories of stuff that they tested, but the Neo3PDR was not one of them. It's not hard to use the manual software, just takes some time. If you have a job with some boring downtime (like waiting for things) it's perfect

12th July 2010, 01:55 PM	#5
JonasKarud diyAudio Member Join Date: May 2008	Use Microsoft Paint and draw a line by hand on a fictive graph, and import the resulting jpg to SPL Copy, the program I referred to above.