Is is possible to use digital and analog outputs simultaneously in 2.1 setup? - diyAudio
Go Back   Home > Forums > Commercial Sector > Manufacturers > miniDSP

miniDSP Low cost, modular Digital Signal Processor (DSP) kits for the DIYer from miniDSP.

Reply
 
Thread Tools Search this Thread
Old 9th February 2014, 10:12 AM   #1
Joku is offline Joku  Finland
diyAudio Member
 
Join Date: May 2009
Default Is is possible to use digital and analog outputs simultaneously in 2.1 setup?

I recently bought a MiniDSP from a friend, and I'm planning to use it to split a stereo signal into 2.1. From what I have heard, MiniDSP has a decent DAC, but I have a pretty nice ezDAC, so is it possible to use digital output for the stereo signal, and analog output for subwoofer?

Basically, I would use SPDIF input into miniDSP, then split it into 2.1 and use SPDIF output to send stereo into ezDAC, and an analog output to send the subwoofer signal to sub amp. Is this possible?
  Reply With Quote
Old 10th February 2014, 08:26 PM   #2
gpapag is offline gpapag  Greece
diyAudio Member
 
gpapag's Avatar
 
Join Date: Nov 2002
Location: Athens-Greece
Joku
Yes it is possible.
You will need also to get a miniDIGI board for the SPDIF input and output though.
If you are still interested, let me know and I will give you connectivity details.

George
__________________
["Second Law is a bitch." - SY] ["The Road To Heaven:Specify the performance & accept the design. The Road To Hell:Specify the design & accept the performance"-Bruno Putzeys]
  Reply With Quote
Old 10th February 2014, 09:12 PM   #3
Joku is offline Joku  Finland
diyAudio Member
 
Join Date: May 2009
I guess I could get a miniDIGI board too.. it doesn't seem to be that expensive. So, yes, I would be interested in connectivity details.
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Digital Crossover/DSP for active speaker with analog and digital input? Guitarfreak Digital Line Level 4 16th July 2013 06:46 AM
Connexelectronic SMPS & Pc Analog outputs. tech9_79 Class D 5 21st February 2012 03:00 PM
Marantz CD6000OSE - analog outputs distorts gumleguf Digital Source 4 27th January 2011 06:25 PM
Coaxial Digital Audio to 5.1 analog outputs? pekinin Digital Line Level 2 2nd April 2009 02:21 PM
Add analog outputs to cheap digital receivers stef1777 Digital Source 4 24th November 2006 07:52 AM


New To Site? Need Help?

All times are GMT. The time now is 11:37 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2