2x4 output impedance, DC filter help? - diyAudio
Go Back   Home > Forums > Commercial Sector > Manufacturers > miniDSP

miniDSP Low cost, modular Digital Signal Processor (DSP) kits for the DIYer from miniDSP.

Reply
 
Thread Tools Search this Thread
Old 28th January 2014, 02:07 PM   #1
diyAudio Member
 
Join Date: Nov 2004
Location: Italy
Default 2x4 output impedance, DC filter help?

I need to interface a 2x4 minidsp with an inverting amplifier, which has low input impedance.
What is the current driving capability of the minidsp output stage? I understand the output impedance is 680 ohm.
Do I need a DC blocking cap at the input of my amplifier, should I decide to add a voltage follower?
  Reply With Quote
Old 29th January 2014, 04:47 AM   #2
Davey is offline Davey  United States
diyAudio Member
 
Join Date: Dec 2001
Location: Bremerton, WA.
The miniDSP unit already has a DC blocking capacitor, so you shouldn't need another.

Inverting amplifiers don't necessarily have low input impedance. However, I imagine it will be quite a bit higher than 680 ohms, so you shouldn't have any issue.

Dave.
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Mini dsp 2x4 output buffer Beau miniDSP 9 28th April 2013 03:00 AM
SET output impedance vs speaker impedance Arno Pf Tubes / Valves 3 20th April 2012 07:37 PM
Do I really need any DC output capacitor between a DAC chip and the low pass filter ? ygg-it Digital Line Level 3 7th April 2011 12:16 AM
3C24 in a SE output stage - output transformer impedance recommendation !!! aldovan Tubes / Valves 15 6th September 2008 10:18 AM
Can An Output Transformer Change A Voltage Amp's Output Impedance From 0.1 To 47 Ohms kelticwizard Everything Else 11 25th March 2007 05:17 AM


New To Site? Need Help?

All times are GMT. The time now is 03:01 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2