I can't seem to get registered on MimiDSP's own forum, so I'm hoping someone will see this here. I've ahd a miniDSP/miniDIGI setup running without problems for quite some time now. Last night we had a brief power flicker, and tonight I can't get a digital signal through the miniDIGI.
I've tried two digital sources (both Squeezeboxes, they normally sit in different systems) and don't get a peep into the amps. The analog inputs into the miniDSP pass a signal just fine. My laptop has no trouble connecting to the miniDSP. I have rebooted the miniDSP a couple of times, reloaded the config file, no dice. The miniDSP LED is flashing, the miniDIGI LED is on continuously.
Is my miniDIGI fried, or am I missing something? Is this my excuse to order a 4X10HD?
Thanks,
Bill
I've tried two digital sources (both Squeezeboxes, they normally sit in different systems) and don't get a peep into the amps. The analog inputs into the miniDSP pass a signal just fine. My laptop has no trouble connecting to the miniDSP. I have rebooted the miniDSP a couple of times, reloaded the config file, no dice. The miniDSP LED is flashing, the miniDIGI LED is on continuously.
Is my miniDIGI fried, or am I missing something? Is this my excuse to order a 4X10HD?
Thanks,
Bill
@ Bill,
Not sure what could be the issue here for not being able to register. Please send an email here if you still have an issue. (Contact us)
As for the miniDIGI, best to send pics of your setup. Did you try a restore to default on the whole stack?
DevTeam
Not sure what could be the issue here for not being able to register. Please send an email here if you still have an issue. (Contact us)
As for the miniDIGI, best to send pics of your setup. Did you try a restore to default on the whole stack?
DevTeam
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.