miniDSP for true active bi-amp system? - diyAudio
Go Back   Home > Forums > Commercial Sector > Manufacturers > miniDSP

miniDSP Low cost, modular Digital Signal Processor (DSP) kits for the DIYer from miniDSP.

Reply
 
Thread Tools Search this Thread
Old 16th June 2013, 05:06 AM   #1
Jdot is offline Jdot  Australia
diyAudio Member
 
Jdot's Avatar
 
Join Date: Jul 2010
Location: Melbourne
Send a message via MSN to Jdot
Default miniDSP for true active bi-amp system?

Iím currently putting together a 2 ch stereo using the active bi-amping method. MiniDSP seems to be the way to go but with limited knowledge Iím struggling to know which components to buy and if they will do exactly as I hope they will do.


Iíve drawn a bit of a chart showing what Iíd like to achieve. The main priority is to have all the DSP/OX happening in the digital domain then send all four channels out to their respective drivers through their own stand alone DACís/Amps.


Click the image to open in full size.



My questions are:


A. Can the diagram drawn work?


B. If it can work will it all be digital as drawn or will there be analogue conversion?


C. Is the miniDSP 2x8 going to work here and is it the best piece to select in the miniDSP range (eg. miniSHARC)?


D. If I use the DIGI-FP do I still need the miniDIGI?


E. Can the 2x8 do DAC duties on two channels sending analogue to the subs but send digital out to four other channels as drawn?


F. Are there any room correction functions available using these items?


G. Whats the most suitable plugin for this setup that gives the most ability?



Thanks for any advice.
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Need help with my bi-amp system benproiii Solid State 18 24th June 2011 08:20 AM
DCX2496 & MiniDSP for Active Crossovers nwboater Digital Line Level 23 21st May 2011 06:29 PM
FR8C 25lt sealed mid-high in active bi-amp system col Multi-Way 0 17th June 2009 12:15 PM
Basszilla - better with active bi-amp? spa317 Multi-Way 0 29th March 2006 11:12 AM
Equalize a passive bi-amp system Sony Solid State 1 1st September 2005 02:54 PM


New To Site? Need Help?

All times are GMT. The time now is 04:40 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright ©1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2