diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   miniDSP (http://www.diyaudio.com/forums/minidsp/)
-   -   MiniDSP 2x8 as pro audio "driverack" (http://www.diyaudio.com/forums/minidsp/233009-minidsp-2x8-pro-audio-driverack.html)

m R g S r 29th March 2013 02:37 AM

MiniDSP 2x8 as pro audio "driverack"
 
Who here is using one for a driverack on their pro amplifiers? (Balanced)


I would like to do a 4 way active system and need 7 channels of DSP. The 8th could do stereo subwoofer processing, but not necessary.

Any issues?

I will mount in a 1ru metal case and have all XLR In's / outs (which is why I don't want the 4x10 in a box)

m R g S r 29th March 2013 03:30 AM

Btw, this is the case I was planning on using. $71 for the 14" deep version. I can mill all my own cutouts for the XLR's...

Par-Metal

David_Web 29th March 2013 01:32 PM

According to the linked plugin datasheet it has no limiters. Which in PA is a dealbreaker (IMHO) unless you use external limiters. No matrix mixer (just switcher) and very limited delay.

Lack of flexibility and lack of easy programming without PC is also a drawback.

It sure could be used if you can work around some of the limitations that could otherwise bite you. It all depends how you intend to use it.

If you count in the money needed around it to get the same functionality the Xilica XA-4080 or XP-4080 is not that much more expensive.

I would have bought the 2x4 balanced version of it had limiters.

I have to say that I have been tempted to do exactly what you describe for home use but I'm not sure I would trust it for PA use.

m R g S r 29th March 2013 01:51 PM

Well I really wasnt looking to spend the $1200...
I was eyeing the Behringer DCX but I don't know about reliability, and I'd have to run the midbass in mono due to only having 6 channels. So I'd rather not go that route...

If my amps have built in limiters and I use those, any negative effects to going this route?

David_Web 29th March 2013 02:57 PM

It depends on the limiters and how you can set them.
It is fully possible to go without limiters if you are careful, but depending on the rig, it could take one careless unplugging of a guitar to do damage if you are unlucky. Especially if the tip hits the wrong metal part.

But in my opinion, you have to know that you don't need them, not wonder why you would need them.

I like things fool proof, there is no guarantee that a kid won't pull up all the faders and create a massive feedback that could blow your speaker. True story, I have never heard of a technician run and navigate a crowd that fast.

If you balance your system right you could easily do with a limiter before the filter if needed.
The more expensive the rig is the more robust it will likely be and could take the abuse of mishaps and the like.
Less expensive rigs might have to run closer to the edge and more likely to break when things go ooops.

m R g S r 29th March 2013 03:00 PM

You're right you have a good point. So for the sub $500 range, the DCX seems like it's a good option then...
Just mono midbass is the only real drawback to that "budget" setup...

m R g S r 29th March 2013 05:45 PM

Or could I use this as a $120 limiting solution, then the mini DSP in a case for $300 +$80. Less than half of the other option, yet full 8ch like I want.

http://www.parts-express.com/pe/show...number=248-652

Zero D 30th March 2013 09:11 AM

Idea !
 
@ m R g S r

Hi, you got me thinking ;)

Instead of miniDSP, how about this ? http://www.diyaudio.com/forums/pc-ba...-new-post.html

$35 plus $5 power supply & cheap case & 2 in x out external soundcard of your choice :)

If you can have multiple outputs with Audacity ? then the choices/options are mindblowing :)

m R g S r 6th April 2013 03:52 PM

Got a used DBX 260 for $550. I'd say I got a good deal

m R g S r 6th April 2013 04:21 PM

Btw, the more I read about PA stereo vs mono the more different the answers become lol


All times are GMT. The time now is 08:43 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2