Solution for Three-Way Active Xover - diyAudio
Go Back   Home > Forums > Commercial Sector > Manufacturers > miniDSP

miniDSP Low cost, modular Digital Signal Processor (DSP) kits for the DIYer from miniDSP.

Reply
 
Thread Tools Search this Thread
Old 27th February 2013, 02:38 PM   #1
diyAudio Member
 
Join Date: Feb 2013
Default Solution for Three-Way Active Xover

Hi,

I want to try building an active three way speaker. Looking at the filter charateristics I realize that I need/want to use more complicated filters than the FIR/IIR variants necessitating the need for a full convolution engine.

How can I best manage this?

For each speaker I need
  • 3 DACs
  • 3 active filter banks doing roughly 1000 taps each
  • 3 amplifiers (already have a plan for building these)
  • Some way of doing master volume

The OpenDRC looks nice but it's only 2-way, right?

/K
  Reply With Quote
Old 4th March 2013, 06:36 PM   #2
diyAudio Member
 
Greebster's Avatar
 
Join Date: Aug 2010
Location: South of the Skyway
The OpenDRC is not a crossover, it is a full convolution FIR/IIR engine. It is a pass through device like a typical EQ, connected through a tape loop/ inline prior to crossovers. You can do the corrections as stated tho perhaps without the taps desired (1000?!) you want with it while requiring the need for two 2x4's or an 2x8 for stereo 3way cross functionality. The technical documentation outlines this information.
  Reply With Quote
Old 5th March 2013, 10:26 AM   #3
diyAudio Member
 
Join Date: Feb 2013
Well,

according to the manual it has 8 output I2S channels so it could do the DRC "inline" and then double up as active Xover after the FIR filter.

1000 taps is probably overkill by a factor of 10, I agree.

My initial thought while perusing the minidsp site was to have just a single miniSHARC do both the DRC and the active Xover duty as well. I realize that the 4x10HD is more suited to just the Xover part but if possible I would like to integrate both of these functions in a single box. Preferably I would like to integrate a miniSTREAMER as well.
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Active xover help. awkwardbydesign Analog Line Level 18 18th June 2012 05:08 PM
Behringer DCX2496 I want to try active biamping using it as the active xover. georgehifi Digital Line Level 3 15th August 2006 07:46 AM
Active xover help! led_zeppelin Solid State 8 28th September 2004 02:14 PM
active xover 5th element Solid State 0 9th March 2003 07:19 PM
ACTIVE XOVER KIERANPHILLIPS Solid State 4 20th August 2001 07:29 PM


New To Site? Need Help?

All times are GMT. The time now is 05:06 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2