diyAudio (
-   miniDSP (
-   -   My setup with minidsp (

lduarte1973 5th August 2012 09:12 PM

My setup with minidsp - comment or post yours if you like
Im a complete newbie with minidsp , so my first question is which xover filter order are you guys using ?

ra7 5th August 2012 09:22 PM

Crossover order is going to completely depend on the design. No single solution can work for everyone. Tell us more about your design and then someone can help you with the crossover.

lduarte1973 5th August 2012 09:49 PM

active sub JBL es250p crossed at 110hz to Visaton GF200

GF200 crossed to Peerless HDS-134PPB ( at 250hz ?)

Peerless HDS-134PPB crossed to Fountek NeoCD1.0M ( at 5khz)

lduarte1973 22nd August 2012 12:05 AM

1 Attachment(s)
getting ready for minidsp....wiring

lduarte1973 22nd August 2012 12:07 AM

1 Attachment(s)
now the subs JBL ES250P

lduarte1973 22nd August 2012 12:11 AM

1 Attachment(s)
the gear , tweeter amp Dynavox VR307A

lduarte1973 22nd August 2012 12:14 AM

1 Attachment(s)
more gear : on top Minidsp 4x10 , CD player cambridge audio 740c , Mids amp Cambridge audio 740 A , bass amp arcam delta 290

lduarte1973 22nd August 2012 12:17 AM

1 Attachment(s)
mids tube preamp , connected between minidsp and mid amp , i like the tube sound in mid frequencies mostly on guitars

Attachment 297269

lduarte1973 22nd August 2012 12:22 AM

1 Attachment(s)
the power tool

lduarte1973 22nd August 2012 12:28 AM

i'm still experimenting with the crossovers and pecs but getting closer to the sound i want

All times are GMT. The time now is 07:35 PM.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright 1999-2017 diyAudio

Content Relevant URLs by vBSEO 3.3.2