Go Back   Home > Forums > > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

miniDSP Low cost, modular Digital Signal Processor (DSP) kits for the DIYer from miniDSP.

Reply
 
Thread Tools Search this Thread
Old 29th July 2012, 01:38 AM   #1
aspringv is offline aspringv  Australia
diyAudio Member
 
Join Date: Sep 2010
Location: Perth, Western Australia
use as a subwoofer processor
Default use as a subwoofer processor, bridged amp adaptor

Hi there all - As was suggested here http://www.diyaudio.com/forums/subwo...ome-built.html can the minidsp be used as a subwoofer crossover/processor wherein it takes an unbalanced stereo pair input signal, split the signal at a crossover freq of about 150hz, then apply a linkwitz transform (values to be deterined), and then output a pair of signals which are identical, but with one phase inverted (in order to drive a pair of bridged amp modules)?

Cheers in advance!

Last edited by aspringv; 29th July 2012 at 02:16 AM. Reason: Clarity of topic
  Reply With Quote
Old 13th August 2012, 05:27 AM   #2
minidsp is offline minidsp  Hong Kong
diyAudio Member
 
minidsp's Avatar
 
Join Date: Dec 2009
Hello,

Sorry for the delay.. we missed your post somehow!

I don't see a problem to perform what you're looking at.. Maybe easiest that you mix before inputing the DSP (e.g. resistor @ inputs to mix L&R). Then feed it to a 4way advanced plug-in and you'll have all the processing you need (custom biquad for LR + phase inversion)

Hoping this clarifies.

DevTeam
__________________
www.minidsp.com - Low cost & modular audio DSP kits for DIYers - Follow our tweets @ minidsp
  Reply With Quote
Old 5th September 2012, 09:58 AM   #3
superR is offline superR  Netherlands
diyAudio Member
 
Join Date: Nov 2006
Location: Rotterdam
Hi there.

Since my question is somewhat similar to aspringv's I'll put it here. I am currently building a subamp. I use a minidsp for front/sub filtering and was wondering if there are problems to be expected when using 1 "normal" subout and 1 "inverted" to drive a bridge setup or will using a DRV134 or similar work better?

Since using an inverted signal is easier I would prefer that.
  Reply With Quote

Reply


use as a subwoofer processorHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Rotel Processor Koenjer Digital Line Level 1 6th February 2012 12:25 AM
Audio Processor Ridin '24'z Digital Source 0 9th April 2007 04:12 PM
Looking for a surround processor. bezeek Everything Else 12 4th January 2007 02:31 AM
Bass processor Matttcattt Everything Else 20 10th March 2004 10:08 PM
cheap 5.1 processor serosmaness Everything Else 1 3rd February 2004 01:11 AM


New To Site? Need Help?

All times are GMT. The time now is 05:24 PM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.79%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio
Wiki