diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   miniDSP (http://www.diyaudio.com/forums/minidsp/)
-   -   Items needed (http://www.diyaudio.com/forums/minidsp/215181-items-needed.html)

jcastellano 26th June 2012 03:26 PM

Items needed
 
Hi,


I am in the process of adding a subwoofer to my stereo system. My amp ( Rega Brio R ) does not have a suitable output for subwoofer and I do not whant to use hi-level signals ( speaker ). I only have one source, a dac, so will this setup fulfill my requirements?

Dac > MiniDsp > Rega Brio R for 80 Hz. or above signals and the other MiniDsp output (both channel mixed) > line level input of subwoofer for 80 Hz. signals or below.

So I need one 2X4 MiniDsp and one 2 way advanced 21 plugin. It is this correct? As you see is a very easy setup but I have not found any answer, all info I have found are for more exotic setups.

Best Regards,

Jorge Castellano:scratch:

minidsp 19th July 2012 03:52 AM

@ Jorge,

You already contacted us separately by email so I'm sure that you're all set. Here is the answer we gave for information sake to other end users. Have fun!

Quote:

Hello,

That's indeed correct and your configuration is fine. The 2.1 advanced would be the plug-in to use to combine L&R to a single mono out.So you're all set with this configuration.

DevTeam



All times are GMT. The time now is 12:46 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2