DIGI-FP - diyAudio
Go Back   Home > Forums > Commercial Sector > Manufacturers > miniDSP

miniDSP Low cost, modular Digital Signal Processor (DSP) kits for the DIYer from miniDSP.

Reply
 
Thread Tools Search this Thread
Old 5th March 2012, 07:38 PM   #1
diyAudio Member
 
DarpMalone's Avatar
 
Join Date: Sep 2008
Location: Toronto
Default DIGI-FP

Have you seen this?

DIGI-FP?

I just ordered a mini-Digi & miniStreamer 4 days ago in order to get USB-Streaming & S/PDIF input for my 2x8... Would this not be an all-in-one solution?

D
  Reply With Quote
Old 6th March 2012, 08:00 AM   #2
minidsp is offline minidsp  Hong Kong
diyAudio Member
 
minidsp's Avatar
 
Join Date: Dec 2009
Hello,

Indeed, a new board was just posted, announcement in progress.. :-)
Note however that it's not a USBStreaming + SPDIF. It's more of a miniDIGI on a front panel (i.e. with AES-EBU though) along with a "USB connector" for the rear panel. i.e. that USB connector is to go to control your miniDSP2x8 hardware. Makes sense?

More info online here: DIGI-FP | miniDSP

Hoping this clarifies.

Devteam
__________________
www.minidsp.com - Low cost & modular audio DSP kits for DIYers - Follow our tweets @ minidsp
  Reply With Quote
Old 21st March 2012, 04:52 AM   #3
JohnR is offline JohnR  Australia
diyAudio Member
 
Join Date: Dec 2001
Location: Steak and Kidney
"Note: If you are ordering this product at a later stage (i.e. separate order) to complete an existing miniDSP 2x8/8x8 kit, please make sure to get in touch with our team first to confirm your platform is compatible"

What is it that determines whether an existing board is compatible or not?
  Reply With Quote
Old 24th March 2012, 12:03 PM   #4
diyAudio Member
 
Join Date: Apr 2008
Default Usable in DCX2496

Hi Minidsp team,

Is this piece of gear usable as a converter spdif / optical to AES/Abu to be build in to my Behringer DCX2496?

Thank you
Peter
  Reply With Quote
Old 29th March 2012, 02:05 AM   #5
minidsp is offline minidsp  Hong Kong
diyAudio Member
 
minidsp's Avatar
 
Join Date: Dec 2009
@ JohnR,

Sorry for the delay in getting back to you... We've missed your post for some reason.
Only the first rev (about 40boards) would require some special connectors. RevB and RevC (latest) would be fine. We'll document with a picture on our website to make sure we properly inform the community. Feel free to contact us if you want a confirmation.

DevTeam
__________________
www.minidsp.com - Low cost & modular audio DSP kits for DIYers - Follow our tweets @ minidsp
  Reply With Quote
Old 29th March 2012, 02:07 AM   #6
minidsp is offline minidsp  Hong Kong
diyAudio Member
 
minidsp's Avatar
 
Join Date: Dec 2009
Quote:
Originally Posted by peterhenk View Post
Hi Minidsp team,

Is this piece of gear usable as a converter spdif / optical to AES/Abu to be build in to my Behringer DCX2496?

Thank you
Peter
Unfortunately, unless you have a microcontroller able to control that unit,it won't be able to. For an SPDIF to AES-EBU, easiest is to get one of the Neutrik transformer piece. Google for Neutrik AES-EBU converter.

DevTeam
__________________
www.minidsp.com - Low cost & modular audio DSP kits for DIYers - Follow our tweets @ minidsp
  Reply With Quote
Old 6th April 2012, 05:53 AM   #7
diyAudio Member
 
Join Date: Aug 2008
So the DIGI-FP has one AES/EBU input, one SPDIF input and one TOS input? And the same complement as outputs?

I'm aware that with the MINI-DIGI I could have an analog input to the 2x8 looped back out via I2S to the MINI-DIGI and then available as a selectable input on the MINI-DIGI to go back to the 2x8 via I2S. Is this possible with the DIGI-FP?

I want to be able to select between an SPDIF source, the USB streamer and an analog source. If it requires that I have multiple presets on the 2x8 set up, I'm happy to do that, but I need to know if I can loop I2S in and out of the DIGI-FP so that SPDIF and the USB streamer are both available as inputs.

Thanks guys, your support is beyond reproach and the product is just incredible value.

--lyndon
  Reply With Quote
Old 16th January 2013, 02:05 PM   #8
diyAudio Member
 
Join Date: Sep 2008
Location: Bristol
I too require the answer to the last question.

Using digi-fp and a 2x8 board. Can you use digital and analogue inputs?
  Reply With Quote
Old 19th February 2013, 07:25 AM   #9
minidsp is offline minidsp  Hong Kong
diyAudio Member
 
minidsp's Avatar
 
Join Date: Dec 2009
@ Studio AU,

sorry for missing your post. Yes you can indeed use digital and analog inputs together if you'd like. To do source selection, just use the presets modifying the matrixing is the easiest..

DevTeam
__________________
www.minidsp.com - Low cost & modular audio DSP kits for DIYers - Follow our tweets @ minidsp
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Need Lab Gruppen FP+ 10000Q Service Manual Wizard Class D 4 5th May 2013 06:17 PM
fusion fp-1002 problems leftys4js Car Audio 34 4th April 2010 05:58 AM
Furutech FP-101G Phono Plugs phresh Swap Meet 0 27th November 2009 08:43 PM
Fusion FP-505: TIP36C Problem theAnonymous1 Car Audio 17 27th May 2008 06:26 PM


New To Site? Need Help?

All times are GMT. The time now is 10:55 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2