Stacking two minidsp's for 2-way plus sub.

dabbler · 9th November 2011, 10:41 PM

I have two minidsp modules (2 x 4's). I use one for a 2 way speaker and would like to connect the other so that I can add a sub (and use the Parametric EQ to smooth out the room modes).

I have looked through the manuals but cant find a clear instruction on stacking 2 minidsp's. Hoping someone can give me some guidance.

I purchased the 2.1 way crossover advanced plug-in, thinking It allowed 3 crossover points (2 way stereo plus 1 mono sub) but it seems to be just a 2 way crossover. Do I now need a 3 way plug-in to make this work?

Thanks

dabbler · 12th November 2011, 11:02 AM

anyone?

dabbler · 12th November 2011, 12:04 PM

Solved. Good info can be found here if anyone else needs it:

http://www.hifizine.com/2010/12/prot...e-minidsp-2x4/

minidsp · 14th November 2011, 07:02 AM

@ Dabbler,

There is no explanation in the user manual on how to stack 2 miniDSP since it's not possible to do control them together. Easier in your configuration is to build a system with the 4way plug-in if you want to control your Left and right speakers in a 3way like configuration.

Hoping this info helps.

DevTeam

9th November 2011, 10:41 PM	#1
dabbler Account disabled at member's request Join Date: Apr 2010 Location: Between cities!	Stacking two minidsp's for 2-way plus sub. I have two minidsp modules (2 x 4's). I use one for a 2 way speaker and would like to connect the other so that I can add a sub (and use the Parametric EQ to smooth out the room modes). I have looked through the manuals but cant find a clear instruction on stacking 2 minidsp's. Hoping someone can give me some guidance. I purchased the 2.1 way crossover advanced plug-in, thinking It allowed 3 crossover points (2 way stereo plus 1 mono sub) but it seems to be just a 2 way crossover. Do I now need a 3 way plug-in to make this work? Thanks

14th November 2011, 07:02 AM	#4
minidsp diyAudio Member Join Date: Dec 2009	@ Dabbler, There is no explanation in the user manual on how to stack 2 miniDSP since it's not possible to do control them together. Easier in your configuration is to build a system with the 4way plug-in if you want to control your Left and right speakers in a 3way like configuration. Hoping this info helps. DevTeam __________________ www.minidsp.com - Low cost & modular audio DSP kits for DIYers - Follow our tweets @ minidsp

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Stacking loudspeaker	kingofska	Construction Tips	3	5th July 2011 06:06 AM
Stacking Cores	uzernaam	Power Supplies	87	5th January 2011 02:04 AM
Using MiniDSP's in a pre amp.. ideas.	jaistanley	Digital Line Level	2	24th November 2010 07:01 AM
Stacking Opamps??	fmak	Digital Source	4	13th August 2004 07:02 AM
Stacking toroids - Ok?	harvardian	Solid State	23	11th September 2002 05:40 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read

12th November 2011, 11:02 AM	#2
dabbler Account disabled at member's request Join Date: Apr 2010 Location: Between cities!	anyone?

12th November 2011, 12:04 PM	#3
dabbler Account disabled at member's request Join Date: Apr 2010 Location: Between cities!	Solved. Good info can be found here if anyone else needs it: http://www.hifizine.com/2010/12/prot...e-minidsp-2x4/