New miniDSP 2x8 kit review - diyAudio
Go Back   Home > Forums > Commercial Sector > Manufacturers > miniDSP

miniDSP Low cost, modular Digital Signal Processor (DSP) kits for the DIYer from miniDSP.

Reply
 
Thread Tools Search this Thread
Old 3rd May 2011, 02:27 PM   #1
vmps is offline vmps  Malaysia
diyAudio Member
 
Join Date: May 2007
Location: malaysia kuala lumpur
Default New miniDSP 2x8 kit review

anyone started playing with this 2x8 yet? please share your experience

vmps
  Reply With Quote
Old 4th May 2011, 09:33 PM   #2
paalj is offline paalj  Norway
diyAudio Member
 
Join Date: Nov 2005
Location: Norway
Hi,
Got the 2 x 8 last week and have just got it connected. It was very easy to set up. I have never had a minidsp before, but I was up and running in 10 minutes. The time consuming bit is the peq setting (hopefully it will appear below). Hopefully there will be a REW integration or measurement import soon. I connected a pot. to control the volume. Had some problems getting it to work due to wrong info in user manual, but the minidsp team sorted this out very fast. When I get time, I will take the speaker outdoors to make better measurements. The speaker is an OB 3-way.
Normally I am using brutefir with Acourate filters and would like to compare it directly, but I need to do some modifications in my system to be able to use my standard 6 ch. poweramp. We'll see later.
Anyway, I used 3pc cheap stereo poweramps to have my first listening test.
English is not my native language, but I will try to explain.
It is easy to localise the performers and the sound is very dynamic and free from noise and distortion. I noted the you have to be careful with the peq setting so you don't go into digital clipping. (I had to turn down the output sliders a bit). Compared to my usd1500 brutefir convolver pc the depth of the soundstage is a bit less. The reason may very well be the poweramps.
This board has almost "no" delay so it is exellent for chinema use. All in all I am very happy with it, but I am missing a remote and display.
/Paal
Attached Images
File Type: png minidsp_2x8_measurement.png (55.8 KB, 1726 views)
  Reply With Quote
Old 5th May 2011, 05:02 AM   #3
minidsp is offline minidsp  Hong Kong
diyAudio Member
 
minidsp's Avatar
 
Join Date: Dec 2009
@ Paal,

Glad to hear of your report of progress on your setup of the miniDSP 2x8. In answer to the couple of comments and questions you hinted:
- Yes REW integration will indeed be added to the miniDSP 4x10 plug-in in the upcoming free upgrade. We're just trying to combine features together. It will certainly help for your EQ'ing + measurement
- IR remote support is also scheduled in the development but we're trying to see what's the easiest to make it easily controllable by standard remotes.. Quite a bit of code on both the firmware side + software side, but it's scheduled so will eventually be out.
- Display: It's something we've been asked for and didn't include for keeping the cost down (i.e. cost of the display isn't the expensive part here, but more the FW dev.. :-) Anyway, we hope to make the platform grow like we've been doing for the miniDSP over the past year and 1/2..

Hope this info helps,

DevTeam
__________________
www.minidsp.com - Low cost & modular audio DSP kits for DIYers - Follow our tweets @ minidsp
  Reply With Quote
Old 5th May 2011, 10:04 AM   #4
jcga is offline jcga  France
diyAudio Member
 
Join Date: Jun 2004
Location: Paris
Hi DevTeam,

As a long time user of DSPs, I follow your development with great interest. Now that you have moved to 24-96k and if I understand correctly what you mean by 4 x10 plug-in ( 2x8 analog + 2x2 digital) the three most important things that I would like to see :

1) pre FIR phase correction on inputs (that will require far less DSP power and complexity than individual FIR magnitude-phase output channel filters

2) sharing biquads in some kind of a pool between filters and PEQ on output channels ( to allow to increase the number of PEQ available when lower order filters are in use) as 5 PEQ could be a little short sometimes.

3) To import drivers mag-min phase response in the plug in software to allow immediate visualization of the overall response (driver + PEQ + filter) without having to measure the result each time. It could be an ASCII import to widen the usability.

Currently, I'm not aware of any DSP kit having implemented point 1 which I consider the most important.

Anyway, than you for bringing affordable DSP to DIY community.
Best regards from France
Jean Claude Gaertner
  Reply With Quote
Old 9th May 2011, 12:22 AM   #5
diyAudio Member
 
vacuphile's Avatar
 
Join Date: Apr 2011
Location: Seaside
Hi DSP people,

I ordered two MiniDSP's a while ago and am very much impressed by these little units; they sound well, measure well, and are a breeze to set up. The idea to work with different plug-ins for different uses is nice as well, although I would prefer a flat rate to download just anything you might need at that particular moment, or just to play with, but that is your business decision.

Now, I could not find any plug ins for the 2 x 8 on the MiniDSP site (nor much other information on the unit). Does this imply that the plug-ins for the 2 x 8 are included in the price?

Keep up the good work,
Vacuphile
  Reply With Quote
Old 9th May 2011, 03:12 AM   #6
minidsp is offline minidsp  Hong Kong
diyAudio Member
 
minidsp's Avatar
 
Join Date: Dec 2009
Hello Vacuphile,

Glad to hear that you're having fun with our miniDSP products. :-)
The miniDSP 2x8 being a new product, there is always going to be some new information added over time (app notes, forum post) though at this time, the user manual is quite comprehensive. Most features to be released will be added to the user manual at a later time...

The plug-in for the miniDSP 2x8 (actually labelled 4x10) is indeed included in the price of the miniDSP board as an intro price for the new platform. Note however that this offer won't last as we start to add new plug-ins and will indeed be part of the cost.

Having a bulk cost of all plug-ins is indeed a good idea for some but may not serve others who are looking for the lowest price.. It's tough to please everybody! :-)

Thanks for taking the time to post your project on our forum,

DevTeam
__________________
www.minidsp.com - Low cost & modular audio DSP kits for DIYers - Follow our tweets @ minidsp
  Reply With Quote
Old 16th April 2012, 05:32 PM   #7
diyAudio Member
 
Join Date: Mar 2012
Location: Rural Isaan
Does the Minidsp allow adding a master volume control?
  Reply With Quote
Old 16th April 2012, 10:08 PM   #8
diyAudio Member
 
Join Date: Mar 2005
Location: copenhagen
Quote:
Originally Posted by Hawaiiman View Post
Does the Minidsp allow adding a master volume control?
This one should do the trick

VOL-FP | miniDSP
  Reply With Quote
Old 17th April 2012, 03:33 AM   #9
diyAudio Member
 
Join Date: Mar 2012
Location: Rural Isaan
Yes, perfect, thanks!
  Reply With Quote
Old 13th August 2012, 09:49 AM   #10
diyAudio Member
 
lduarte1973's Avatar
 
Join Date: Feb 2009
Location: Lisbon
I have the minidsp for a week now , after playing with the pecs and xovers i basicly endup with xover values very similar to the original xover from JBL (guess they knew what they were doing ). I have only good things to say about minidsp so far , very easy to setup , once rid of the pass xover the speakers show what they realy can do. After setting up the correct volume for the amps without equalizing ( i use 5 amps : 1 for each sub , 1 for woofers , 1 for mids , 1 for tweeters ) , i didnt even need all the pecs available. Im still learning but if my speakers sound like that in only a week they should still improve a lot .
__________________
Hey ! just because im getting bald doesnt mean i cant like hair metal
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Review of New S-5 K-16LS Kit fenpark15 Tubes / Valves 155 20th September 2014 12:03 AM
2x8 kit Secips miniDSP 26 1st August 2011 11:57 AM
New miniDSP 2x8 kit minidsp miniDSP 0 11th April 2011 11:40 AM
miniDSP Kit and Crossover Configuration Software vdi_nenna miniDSP 1 22nd November 2010 07:29 AM
Introducing miniDSP Balanced Kit minidsp miniDSP 3 29th September 2010 08:38 PM


New To Site? Need Help?

All times are GMT. The time now is 02:06 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2