diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   miniDSP (http://www.diyaudio.com/forums/minidsp/)
-   -   Interfacing with +4 dBu gear (http://www.diyaudio.com/forums/minidsp/171093-interfacing-4-dbu-gear.html)

audiothings 31st July 2010 08:39 AM

Interfacing with +4 dBu gear
 
I plan to interface your MiniDSP kit with a Presonus Firestudio Project, which has +4 dBu balanced outputs on 1/4" TRS jacks.

* Should I use 'RevA' or 'RevB' of your MiniDSP kit

* Should I worry about anything while interfacing my +4 dBu output with your -10 dBV input?

Thanks,

Jai Shankar.

minidsp 2nd August 2010 01:37 AM

Jai,

A couple of points to remember:
1) If you're balanced out, you'll need a balanced to un-balanced interface between your Presonus and the miniDSP (unbalanced inputs)
2) If the output is indeed +4dBu (1.2Vrms), then RevB will be a better choice.

Hope this makes sense


All times are GMT. The time now is 04:54 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2