CHR 70A Gen3 Dual Driver for Pensil - Page 4 - diyAudio
Go Back   Home > Forums > Commercial Sector > Manufacturers > Markaudio

Markaudio Designers and builders of audiophile grade drivers

Reply
 
Thread Tools Search this Thread
Old 4th March 2014, 02:56 AM   #31
JoeyGS is offline JoeyGS  Philippines
diyAudio Member
 
Join Date: Aug 2007
Thanks Scott.

Quote:
Originally Posted by Scottmoose View Post
No, considerably worse.
  Reply With Quote
Old 26th March 2014, 09:42 AM   #32
JoeyGS is offline JoeyGS  Philippines
diyAudio Member
 
Join Date: Aug 2007
Hi guys,

Finishing of my pensil box is nearing completion. I am planning to install a plinth at the bottom of the box with a wider base dimension than the base of the pensil. If I do this, will this affect the port hole's function?

Thanks
Joey
  Reply With Quote
Old 26th March 2014, 12:01 PM   #33
diyAudio Member
 
Scottmoose's Avatar
 
Join Date: Mar 2005
Location: UK
Providing it's not ridiculously thick, no issues.
__________________
Community site www.frugal-horn.com Commercial site www.wodendesign.com
  Reply With Quote
Old 26th March 2014, 01:02 PM   #34
JoeyGS is offline JoeyGS  Philippines
diyAudio Member
 
Join Date: Aug 2007
Thanks Scott....

It may be 1 to 1-1/2 inch thick maximum.....

Quote:
Originally Posted by Scottmoose View Post
Providing it's not ridiculously thick, no issues.
  Reply With Quote
Old 26th March 2014, 03:56 PM   #35
diyAudio Member
 
Scottmoose's Avatar
 
Join Date: Mar 2005
Location: UK
Nothing much to worry about there then.
__________________
Community site www.frugal-horn.com Commercial site www.wodendesign.com
  Reply With Quote
Old 27th March 2014, 05:39 AM   #36
JoeyGS is offline JoeyGS  Philippines
diyAudio Member
 
Join Date: Aug 2007
Here it is ....... added top wooden cap and bottom wooden plinth

Click the image to open in full size.

Click the image to open in full size.

Click the image to open in full size.

Now on to assembling the drivers and the stuffings.....
  Reply With Quote
Old 18th April 2014, 11:54 PM   #37
JoeyGS is offline JoeyGS  Philippines
diyAudio Member
 
Join Date: Aug 2007
Hi Scott,

Any progress on the twin driver enclosure?

Thanks


Quote:
Originally Posted by Scottmoose View Post
Since Vas has doubled, the alignment significantly changes from what was designed, with attenuated LF gain. As noted, it is not something I recommend doing, although I'm glad you are happy with the results. There is a dedicated twin driver enclosure design which I have finished however & is in the queue for drawing up.
  Reply With Quote
Old 19th April 2014, 01:31 AM   #38
chrisb is offline chrisb  Canada
diyAudio Member
 
Join Date: Aug 2002
Location: victoria BC
More likely to be drawn by Dave? In which case the squeaky wheel, and all that
__________________
you don't really believe everything you think, do you?
community sites t-linespeakers.org, frugal-horn.com commercial site planet10-HiFi
  Reply With Quote
Old 19th April 2014, 02:29 AM   #39
frugal-phile(tm)
diyAudio Moderator
 
planet10's Avatar
 
Join Date: Oct 2001
Location: Victoria, BC, NA, Sol III
Blog Entries: 5
What twin driver enclosure?

dave
__________________
community sites t-linespeakers.org, frugal-horn.com, frugal-phile.com ........ commercial site planet10-HiFi
p10-hifi forum here at diyA
  Reply With Quote
Old 21st April 2014, 09:44 AM   #40
JoeyGS is offline JoeyGS  Philippines
diyAudio Member
 
Join Date: Aug 2007
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
My simple CHR-70a Desktop Speakers Chad1376 Markaudio 14 8th January 2014 04:12 PM
Tower speakers for HT front and surround speakers (using CHR-70A) nowobody Markaudio 22 14th December 2012 04:42 AM
Cutting plans for Pensil 12 and Super Pensil zman01 Markaudio 3 24th March 2011 04:48 AM
Driver/enclosure to complement Alpair 10.2 FR Pensil in a FAST system? southernoise Markaudio 24 7th February 2011 01:04 PM
Foster 12" Woofer Ripole sub: single dual driver unit or dual single driver units? IG81 Multi-Way 3 4th February 2010 02:48 AM


New To Site? Need Help?

All times are GMT. The time now is 10:34 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2