diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Markaudio (http://www.diyaudio.com/forums/markaudio/)
-   -   My little CHP-70 build. (http://www.diyaudio.com/forums/markaudio/241160-my-little-chp-70-build.html)

ormen 21st August 2013 03:24 PM

My little CHP-70 build.
 
10 Attachment(s)
Hi.
Thought i would show of my new speaker build. Still some work to do, but im getting there.

Attachment 367027 Attachment 367028 Attachment 367029 Attachment 367030 Attachment 367031 Attachment 367032 Attachment 367033 Attachment 367034 Attachment 367035 Attachment 367036

malibujeff 21st August 2013 03:41 PM

Any pictures on how you made the curved sides?

ormen 21st August 2013 03:53 PM

3 Attachment(s)
Here some :) Keep it simple.

The first picture shows the exact curve i used. A stick with masking tape. :)
I used the same curve for the stand.

Attachment 367037 Attachment 367038 Attachment 367039

I dont now if anything is wrong with me, but i find that last picture a little bit sexy.. :D

chrisb 21st August 2013 05:54 PM

Quote:

Originally Posted by malibujeff (Post 3603882)
Any pictures on how you made the curved sides?

from the photos, looks like kerfed MDF to me

ormen 21st August 2013 06:07 PM

Quote:

Originally Posted by chrisb (Post 3604064)
from the photos, looks like kerfed MDF to me

It is sorry. I thouhgt the guestion was how i found the curve.

malibujeff 21st August 2013 06:40 PM

Quote:

Originally Posted by chrisb (Post 3604064)
from the photos, looks like kerfed MDF to me

Oh, now I can see it. Your eyes are much better than mine :)

chrisb 21st August 2013 08:01 PM

ormen - where the curved panels and braces cut by hand / pattern jig with router, etc?

StevenZ 21st August 2013 08:23 PM

Great work.

zman01 21st August 2013 09:20 PM

Ormen,

Very nice build. The CHP-70 gen 1 are sweet sounding drivers.

ormen 22nd August 2013 09:02 AM

Quote:

Originally Posted by chrisb (Post 3604220)
ormen - where the curved panels and braces cut by hand / pattern jig with router, etc?

They where cut by hand with jigsaw and snug sanded with my disc sander.
Then i rounded a 45 degree angle on the midle section to smooth i out a bit.


All times are GMT. The time now is 09:22 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2