Minor error on the A10.2 Spec sheet
I was machining some baffles for the A10.2 today and I noticed that the flange thickness with the bessel on is incorrect. It shows 5/32"-11.8mm. it should be 15/32"-11.8mm.
I always measure from the driver in hand, so no problem. Actually, I like the driver to be slightly proud of the baffle, so I did the rabbet 7/16".
|All times are GMT. The time now is 03:15 AM.|
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright ©1999-2014 diyAudio