FAST subs under MA drivers - Page 12 - diyAudio
Go Back   Home > Forums > Commercial Sector > Manufacturers > Markaudio

Markaudio Designers and builders of audiophile grade drivers

Reply
 
Thread Tools Search this Thread
Old 23rd February 2012, 06:41 PM   #111
diyAudio Member
 
Join Date: Jun 2011
Location: amsterdam
I'm enjoying the 7.3's in a 10 liter bass reflex for a few months now, but all this FAST talk has made me sort of hungry..;-)


Few questions:

-The peerless 10 & 8 inch look great, and the price is good. What would be the differences soundwise between the two?
Somehow my gutfeeling tells me the 10 inch will go lower, but the 8 inch might sound a bit faster.

-I'm not able to use a minidsp (or i would need to build a new amp..), so a first order XO would need to do the trick.
What i get is a 5.09 mH inductor, and a 117 uF cap if i cross at 250hz, does this sound correct? I took the nominal impedances form the specsheets, however since one crosses at a certain point, doesn't that change the effective impedance?

-Are there some budget tricks to experiment with different crossovers? What i mean is for instance testing with electrolytics before plunging out big cash for audiophile grade xo caps? It is going to cost a few bucks this crossover as far as i can tell now..

And thanks all for the info in this topic, learned a lot!
  Reply With Quote
Old 24th February 2012, 03:51 AM   #112
diyAudio Member
 
Join Date: Feb 2011
I have not tried the 8" but the 10" works pretty well. There is a bit of efficiency difference between the two, but not much difference in deep response given the same size cabinet. The 10" is a really nice driver that can be crossed pretty high if needed (makes 1st order easy). The 10" will also provide more headroom than the 8".

A single 10" should work pretty well with an Alpair 7. For a 1st order at 250hz, 5mH on the woofer would be OK and you might just get a single 100uF (Solen makes one) for the Alpair 7. If I were building another system, I might use a 90 litre sealed box with a generous amount of that recycled denim insulation loosely packed.

YMMV.
  Reply With Quote
Old 25th February 2012, 10:19 AM   #113
diyAudio Member
 
Join Date: Jun 2011
Location: amsterdam
Thanks Silverhairbp!
In your experience could the 10" work in a fully stuffed enclosure a bit under 40 liters? If i put that in a calculator i get a bump around 100 herz.

I probably might end up using the 8" although i like the idea of surface instead of excursion for bass a lot better.
  Reply With Quote
Old 25th February 2012, 08:49 PM   #114
diyAudio Member
 
Join Date: Feb 2011
IMO, the 7.3 is better matched with the Peerless 10" 830668 because of baffle step loss. The 10" will work in 40 litres sealed but will have a steeper rolloff down deep. F3 of around 43hz F10 in the upper 20s. Haven't tried a small box with the Peerless but modeling makes it look like there is less dynamic restriction with a larger box. Not a particularly good idea for deep bass unless the intent is to restrict driver excursion.

And I agree. My personal preference is for shorter excursion with larger speaker area.
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Audio Alto with MA drivers? djanci Markaudio 15 12th December 2012 09:50 PM
MA AUDIO HK-4000D ,NO OUTPUT TO SUBS WRENCH030380 Car Audio 5 11th March 2011 10:39 PM
Crown MA-12000i / MA-5000i / MA-9000i jack2040 Solid State 4 8th March 2011 01:21 PM
ma audio hk-4000 ,no sound to subs ?MA AUDIO HK-4000,NO OUTPUT TO SUBS WRENCH030380 Class D 2 7th March 2011 11:38 PM
FS: horn subs, drivers, 'regular' subwoofer drivers John Sheerin Swap Meet 0 1st August 2004 11:33 PM


New To Site? Need Help?

All times are GMT. The time now is 04:11 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2