diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Markaudio (http://www.diyaudio.com/forums/markaudio/)
-   -   Mark audio I am looking at two of your drivers help please. (http://www.diyaudio.com/forums/markaudio/190574-mark-audio-i-am-looking-two-your-drivers-help-please.html)

phil09 10th June 2011 01:55 AM

Mark audio I am looking at two of your drivers help please.
 
Hello mark. I have tryed to E-mail but, you must have not gotten it. I am looking at 2 of your paper drivers. One is the Css EL-70 and the other is the Alpire 6P's. I am looking for a driver at is very natural,live and warm sounding. :D. I have always thought paper was the best.:D Also was the Css EL70 made by you for bob over at Css or could I put this in your reg. line of drivers? Also is there a diffrance in papers used in the two speaker drivers? Now last quesion? Are you coming out with a gen. #3 for the Alipre 6p's? Madsiound is sold out of all your drivers but, the Alpire 6ps. I would like to hold off so I could get the newest Apire 6p's you offer. Thanks jm:)

ra7 10th June 2011 02:42 AM

You've misspelled 'Alpair' three different ways in a single four-liner post. C'mmon jm, put a little effort into it. Maybe you'll get a reply then.

DYNABLASTERTUNERS 10th June 2011 02:56 AM

Megalol! :D

type 10th June 2011 02:58 AM

Might I suggest posting this in the manufacturer forum under Mark Audio?

planet10 10th June 2011 04:25 AM

Quote:

Originally Posted by phil09 (Post 2600400)
I have tryed to E-mail but, you must have not gotten it. I am looking at 2 of your paper drivers. One is the Css EL-70 and the other is the Alpire 6P's. I am looking for a driver at is very natural,live and warm sounding. :D. I have always thought paper was the best.:D Also was the Css EL70 made by you for bob over at Css or could I put this in your reg. line of drivers? Also is there a diffrance in papers used in the two speaker drivers? Now last quesion? Are you coming out with a gen. #3 for the Alipre 6p's? Madsiound is sold out of all your drivers but, the Alpire 6ps. I would like to hold off so I could get the newest Apire 6p's you offer. Thanks jm:)

MArk is very busy, having jut built CHR70.3, CHP70.3, Alpair6.2, Alpair10.2 & ALpair7.3. He is the midst of getting them on the boats to the distribs. He has also been a bit under the weather.

EL70 is made by Mark, but with Bob's input tailored for NA.

Both the EL70 & the A6P are natural,live and warm sounding. EL70 is the North American sibling to the Japan/Euro CHP70. These, with the CHR70, are the budget end of the Mark Audio. The Alpair6P is the smallest of the Alpair line. A6P will have greater finese thru the mid & top and reveal any deficiencies in your front end. The EL70 is more tolerent, and even thou only a 4" is the bass monster of the MA line. A10 may go lower, but none rock like the EL70 (and for less than a pair of A10, you can have 4 EL70). A6P is a 3" -- althou it has good bottom vrs most 3", it is a 3".

The 2 paper formulations are quite different.

Mark, i am sure, will continue making his drivers better, he is relentless. But the batch of A6 on the boats next week is the same as the one's Madiosund is sold out of.

dave

chrisb 10th June 2011 06:09 AM

Quote:

Originally Posted by ra7 (Post 2600426)
You've misspelled 'Alpair' three different ways in a single four-liner post. C'mmon jm, put a little effort into it. Maybe you'll get a reply then.



Well, even our firend Dave has bene nkown to misstipe a time or two

and it sure happens to me on my iPhone

phil09 10th June 2011 09:10 PM

Quote:

Originally Posted by ra7 (Post 2600426)
You've misspelled 'Alpair' three different ways in a single four-liner post. C'mmon jm, put a little effort into it. Maybe you'll get a reply then.


Wow? Would you like to answer the quetions I posted or just point out I miss spelled " Alpair " 4 times?

phil09 10th June 2011 09:12 PM

Quote:

Originally Posted by phil09 (Post 2600400)
Hello mark. I have tryed to E-mail but, you must have not gotten it. I am looking at 2 of your paper drivers. One is the Css EL-70 and the other is the Alpire 6P's. I am looking for a driver at is very natural,live and warm sounding. :D. I have always thought paper was the best.:D Also was the Css EL70 made by you for bob over at Css or could I put this in your reg. line of drivers? Also is there a diffrance in papers used in the two speaker drivers? Now last quesion? Are you coming out with a gen. #3 for the Alipre 6p's? Madsiound is sold out of all your drivers but, the Alpire 6ps. I would like to hold off so I could get the newest Apire 6p's you offer. Thanks jm:)

A note " Alpair" Was missed spelled 4 times as pointed out? Just human:rolleyes:

ra7 10th June 2011 09:18 PM

It was meant with the best of intentions. It happens to all of us, it was just too good to let go. Sorry if you thought it was rude. I thought you'll take it in jest, as it was meant to be. And if I had something helpful to reply, I would've replied anyway, like the others have.

Peace, my friend!

phil09 10th June 2011 09:28 PM

Quote:

Originally Posted by chrisb (Post 2600580)
Well, even our firend Dave has bene nkown to misstipe a time or two

and it sure happens to me on my iPhone

Thankyou it happends human:D


All times are GMT. The time now is 08:00 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2