Dan Archer - Australia

markaudio · 04:07 AM

Hi Guys,
I'd like to introduce Dan Archer in Australia. He's our dealer down-under. I've always promised to drop in but never made it to Launceston Tasmania until last week. Dan lives on the outskirts of Launceston, situated in North of Tasmania, its a most beautiful part of the world.

Dan made us very welcome. He's very much an experimenter, the front room looks like a studio with several different systems in view. Sadly we only had a few hours to spend in Dan's company so we chatted at break-neck speed on just about everything DIY. Significantly, for next year Dan hopes to have his new workshop fully operational so he can operate a cabinet kit and complete build service. This maybe of interest to Australian and NZ DIYers so feel free to contact him.

Mark Audio : Darcher Audio
Contact Us : Darcher Audio

Cheers

Mark.

gooki · 26th December 2010, 08:03 AM

Dan provides excellent service - good to see you managed to visit.

sfreak · 29th December 2010, 10:12 AM

Was very good of you to drop in. No doubt was a good chat and looking forward to a big 2011.

In regards to plans for 2011, hoping to get a workshop back up and running and offering both fully built loudspeakers and kits. Will be offering quite a few utilising the Mark Audio range of drivers.

If anyone else wants anymore info in regards to that, by all means get in touch.

blakkshepeaudio · 30th December 2010, 06:25 AM

Greets!

Who is who in the picture? Don't be shy.......

Will be bothering Dan a bit in 2011.....

Regards,
Keith Arnold
blakkshepeaudio

nipper575 · 30th December 2010, 06:41 AM

I also had a very positive experience purchasing from Darcher Audio. Very glad to hear that you are expanding, I wish you all the best.

sfreak · 30th December 2010, 10:07 PM

G'day Keith,

Mark is the one on the left and I am the one on the right holding the lovely Alpair 12.

qusp · 13th January 2011, 06:35 AM

i'm very interested in some tassie blackwood or sasafrass front panels (solid) and veneer for the rest of a cabinet for a smallish 2 way based on scanspeak 21W-8554 (tweater undecided) digi XO. so may be interested in a full box kit (no electronics or connectors) using tassie timbers, I have balanced Denon D2000 woodies (headphones) using tassie blackwood that sound great and look even better. and am looking at using tassie timbers for the panel of my mixed media Dac chassis.

anyway hows status on this stuff? can email me at qusp (at) optusnet (spot) com (spot) au

29th December 2010, 10:12 AM	#3
sfreak diyAudio Member Join Date: Apr 2006 Location: Tasmania, Australia	Was very good of you to drop in. No doubt was a good chat and looking forward to a big 2011. In regards to plans for 2011, hoping to get a workshop back up and running and offering both fully built loudspeakers and kits. Will be offering quite a few utilising the Mark Audio range of drivers. If anyone else wants anymore info in regards to that, by all means get in touch. __________________ Darcher - Audio Visual - Computers

30th December 2010, 10:07 PM	#6
sfreak diyAudio Member Join Date: Apr 2006 Location: Tasmania, Australia	G'day Keith, Mark is the one on the left and I am the one on the right holding the lovely Alpair 12. __________________ Darcher - Audio Visual - Computers

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Dan D'Agostino removed from Krell	a.wayne	Everything Else	4	9th November 2011 09:50 PM
Dan D Agostino Interview..... Papa is one of the best !!!	a.wayne	The Lounge	2	19th October 2011 02:56 PM
For John and Dan - TDS210 display replacement.	ashok	Parts	6	4th July 2011 05:49 AM
Dan Wiggins,what is going on with Tempests ?	RobWells	Subwoofers	23	18th April 2005 12:19 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read

26th December 2010, 08:03 AM	#2
gooki diyAudio Member Join Date: Dec 2008	Dan provides excellent service - good to see you managed to visit.

30th December 2010, 06:25 AM	#4
blakkshepeaudio diyAudio Member Join Date: Sep 2010 Location: Country Victoria Australia	Greets! Who is who in the picture? Don't be shy....... Will be bothering Dan a bit in 2011..... Regards, Keith Arnold blakkshepeaudio

30th December 2010, 06:41 AM	#5
nipper575 diyAudio Member Join Date: Jun 2010 Location: Northern Tasmania	I also had a very positive experience purchasing from Darcher Audio. Very glad to hear that you are expanding, I wish you all the best.

13th January 2011, 06:35 AM	#7
qusp Sometimes a square peg fits a round hole just fine diyAudio Member Join Date: Oct 2009 Location: Brisbane, Australia	i'm very interested in some tassie blackwood or sasafrass front panels (solid) and veneer for the rest of a cabinet for a smallish 2 way based on scanspeak 21W-8554 (tweater undecided) digi XO. so may be interested in a full box kit (no electronics or connectors) using tassie timbers, I have balanced Denon D2000 woodies (headphones) using tassie blackwood that sound great and look even better. and am looking at using tassie timbers for the panel of my mixed media Dac chassis. anyway hows status on this stuff? can email me at qusp (at) optusnet (spot) com (spot) au

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)