Techniboots Isolation Feet for Technics SL Series Turntables

[mainscablesrus]

Techniboots now available at Mains Cables R Us. Newly developed product which is a set of 4 isolation feet made from a visco-elastic polymer which simply fit over the existing stock feet, no tools or adjustment needed. Will also fit over the isonoe feet to add an extra degree of dampening and resonance control, a brilliant idea for all users of the SL1200 series turntables.

Available from the MCRU website now. £39.95 plus postage. We ship worldwide at cost.

[Jimmin]

Do these isolation boots fit any other Technics turntables?

[mainscablesrus]

Originally Posted by Jimmin

Do these isolation boots fit any other Technics turntables?

hi
they should do, they are basically a soft rubber pot so if the feet fit in (they don't have to be tight round the edges as they go in) then all will be good

[mainscablesrus]

Here is a picture of them in situ:-

[Jimmin]

Originally Posted by mainscablesrus

hi
they should do, they are basically a soft rubber pot so if the feet fit in (they don't have to be tight round the edges as they go in) then all will be good

Do you have a measurement on the SL1200 foot, or an inside measurement of the boot? I can put a caliper on the foot of what I have & let you know.

[mainscablesrus]

Originally Posted by Jimmin

Do you have a measurement on the SL1200 foot, or an inside measurement of the boot? I can put a caliper on the foot of what I have & let you know.

hello
the inside of the boot measures 55mm

thx

[Jimmin]

37mm is the OD of a SL-QL1 foot.

[mainscablesrus]

it will just sit inside the boot then no problem

[mainscablesrus]

New customer who likes his new techniboots.

[vinylkid58]

Originally Posted by mainscablesrus

New customer who likes his new techniboots.

Is that a Delrin platter?

jeff