Anyone know of where i can buy a small digital hour meter from?

ace3000_1 · 7th May 2004, 10:01 AM

Heya guys, just courious to to know if anyone knows where i can buy a small digital hour meter from, it will be for a project of mine to measure how long the lamp in my projector has been running for. I will need somthing that can hold its memory when power is off, and it must add the hrs up.

Any other thoughts or ideas are much apreciated.

Regards
Trev

Magura · 7th May 2004, 11:08 AM

Lascar would be the way to go....they even cater DIY'ers

Magura

ace3000_1 · 7th May 2004, 11:13 AM

Thanks Magura, much apreciated, ive seen a few small hr meters for racing carts, they dont seem too bad, but pricey, diy is the way to go ofcourse, ill check this place out, thanks

Trev

ace3000_1 · 7th May 2004, 11:32 AM

I found one there that would do the trick

, but, how does it sense anything to start timing? is this done by the power being turned on? if so im right then lol.

Link:
http://www.lascarelectronics.com/DAT...EMC%201500.PDF

Btw, great site.

Trev

Magura · 7th May 2004, 11:23 PM

Yes, when power is applied, it starts counting.

The big deal about Lascar is the reasonable price level, Ive used them for robotics as service interval meters. They are very reliable and easy to deal with.

Magura

7th May 2004, 10:01 AM	#1
ace3000_1 diyAudio Member Join Date: Mar 2003 Location: spain	Anyone know of where i can buy a small digital hour meter from? Heya guys, just courious to to know if anyone knows where i can buy a small digital hour meter from, it will be for a project of mine to measure how long the lamp in my projector has been running for. I will need somthing that can hold its memory when power is off, and it must add the hrs up. Any other thoughts or ideas are much apreciated. Regards Trev

7th May 2004, 11:08 AM	#2
Magura diyAudio Member Join Date: Oct 2003 Location: Denmark, Viborg	Lascar would be the way to go....they even cater DIY'ers Magura __________________ Everything is possible....to do the impossible just takes a little while longer. www.class-a-labs.com

7th May 2004, 11:23 PM	#5
Magura diyAudio Member Join Date: Oct 2003 Location: Denmark, Viborg	Yes, when power is applied, it starts counting. The big deal about Lascar is the reasonable price level, Ive used them for robotics as service interval meters. They are very reliable and easy to deal with. Magura __________________ Everything is possible....to do the impossible just takes a little while longer. www.class-a-labs.com

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
digital VU-meter	yulquen	Digital Line Level	22	18th January 2009 11:26 PM
Hour Meter for a Tube Amp..	DaveMcLain	Tubes / Valves	16	9th May 2008 09:18 PM
Wiring Digital Volt Meter	Dominick22	Chip Amps	19	24th April 2006 05:58 PM
Fs Avo/bk/tenma Digital Lcr Meter	powertriode	Swap Meet	4	4th April 2005 05:50 PM


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

7th May 2004, 11:13 AM	#3
ace3000_1 diyAudio Member Join Date: Mar 2003 Location: spain	Thanks Magura, much apreciated, ive seen a few small hr meters for racing carts, they dont seem too bad, but pricey, diy is the way to go ofcourse, ill check this place out, thanks Trev

7th May 2004, 11:32 AM	#4
ace3000_1 diyAudio Member Join Date: Mar 2003 Location: spain	I found one there that would do the trick , but, how does it sense anything to start timing? is this done by the power being turned on? if so im right then lol. Link: http://www.lascarelectronics.com/DAT...EMC%201500.PDF Btw, great site. Trev

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read