Really cool!

[mdlover]

looks really cool!

how about a V12?

[li_gangyi]

did you do it urself or wad??

[Guss]

It does look really nice but whats the point? I mean yeah he has a nice table but what crappy sound system ! I want this table

[li_gangyi]

we're looking at the table here...hey~! it's got holes for wine and liquor..I think a rip down to the scrap yard could do it...but in SG...most cars are scrapped immeduiately..so where do I get an engine block with 4 pistons....I mean maybe I need 8...coz u have to jam the 4 to support the table...or maybe he just welded it there??

[mdlover]

oops.....i don't own the table.

just a friend of mine send this pic.

[Da5id4Vz]

It needs Tang Bands in the cylinder wells and a small valve amplifier where the intake manifold would have gone to drive them.

[mdlover]

good idea.

[li_gangyi]

I might try building that tabl...not sure where to get the engine block though...

[Da5id4Vz]

Try taking a picture down to the scrap yard, and telling them what your thinking about, they should be able to pull something out and set it aside for you.

Once you’ve got the engine block you’ll have to find some way of degreasing it. Steam cleaning with a detergent is a good start to get most of the crud off. You'll likely need to find a mechanic or a body shop to do that part for you.

Sand blasting or a wire brush will get you down to bare metal after that.

The pushrod openings look to be about the right size to mount tube sockets in.

[li_gangyi]

yeah...I would go to my local scrap yard and try there...but in SIngapore...our scrap yard takes the engine and scraps it almost immediately...so I must be fast...or it's gone...hmmm...