Petp Capacitors-one Of The Best? - diyAudio
Go Back   Home > Forums > Member Areas > The Lounge

The Lounge A place to talk about almost anything but politics and religion.

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 7th May 2009, 11:32 PM   #1
diyAudio Member
 
Join Date: Sep 2005
Location: london
Default Petp Capacitors-one Of The Best?

I wanted to share with the rest of the DIY community my experience with these capacitors, as I believe they are fantastic bargains bettering IMHO a lot of the exotica out there, but costing 'pennies'.

I first discovered them on EBAY several years ago, sold mostly out of the Eastern European/Russian community. I believe they are of military origin and in true fashion appear to be put together really well. I have been using them for several years now and have extensive experience with them. They are still sold as bulk buys on EBAY and cost 'pennies'

These caps mostly run from .001 to 22uf and voltages up to 1200v. They can therefore be used for tube projects as well as solid state.

I have used them in every type of electronic circuit that I have come across in my diy hifi adventures. They have never dissapointed. They bring great detail and neutrality to proceedings. But rather than go on about their sound i can perhaps best sum up their sound by the comparisons I have done with them

Audio note tin foil caps- petp was more dynamic and more detailed sounding probably equal in most other areas.

Jenson paper in oil caps - again a very similar finding

Sanyo's Oscon,the sanyo's sounded slower and less dynamic in comparison

Mundorf silver - the PETP matched it for detail and I believe was less strident and aggressive at the top end.

Black Gates - very similar sonic character, but the black gates had the edge for inner tonal detail.

Russian Teflon and PIO - again very similar finding as for the audionote and jenson paper in oils described above.


Still one of the best caps i have ever used for application in speaker crossover in which they are as good as if not better than the non polar black gates that cost a fortune.

The only capacitor I would probably prefer are the Audionote Copper paper in oils but not by a great margin. They tame the top end , bringing in more refinement and naturalness to the top end and midrange. So I guess if i were to criticise them then the top end needs to be matched a bit.

One of the all time great bargains in my book!
  Reply With Quote
Old 23rd June 2009, 08:28 AM   #2
diyAudio Member
 
Join Date: Feb 2005
Location: Melbourne
Ah, this is very interesting thing indeed. I was just about to spend a silly amount on 2 of those copper caps!

Is there any diffarence between the K73 -16, 11 and the P4 types.
Also, it seems Rifa has/is making caps with the PETP dialectric according to the eBay China source, yes?

It's curious to see the difference in price between the Latvian, Russian and other countries for the perhaps same caps. As usual, it's ther damn freight that's the killer.
__________________
... jh
  Reply With Quote
Old 23rd June 2009, 02:53 PM   #3
diyAudio Member
 
Join Date: Sep 2005
Location: london
I use mostly K73-16 but have used the others as well and have not been sure of a significant difference. The military PIO (which i see used on DIYaudio)are absolutely no where near the quality of the PETP's, which by the way are non polar.

I just bought 30 1uf 600v at 15us cents a piece, audionote tin/aluminium are over $30 each and the copper ones are $100 each. the Mundorf silvers are not far off those prices as are the jensens!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!
  Reply With Quote
Old 23rd June 2009, 03:39 PM   #4
diyAudio Member
 
analog_sa's Avatar
 
Join Date: Aug 2002
Location: Sofia
Default Re: Petp Capacitors-one Of The Best?

Quote:
Originally posted by audiojoy
as good as if not better than the non polar black gates that cost a fortune.


Non-polar BG cost a fortune? Not sure how to interprete this. The BG are generally much cheaper than any decent film for the same capacitance. And you actually prefered BG to Mundorf SIO?!

Never used PETP capacitors mostly because polyethylene terephthalate is some type of polyester. Otoh i've used other russian caps (FT3, K40-Y9, MBGB) and although certainly good value for the money they are ridiculously overhyped. Great if you're on budget or building for someone else though
  Reply With Quote
Old 23rd June 2009, 06:19 PM   #5
diyAudio Member
 
Join Date: Feb 2005
Location: Melbourne
Thanks Audiojoy,

Ordered a few different values of the K73-16 PETPs - It'll be interesting to hear what they sound like.

I've also heard that some ordinary Siemens stacked film caps can sound very good and they're not even propylene.
__________________
... jh
  Reply With Quote
Old 23rd June 2009, 09:03 PM   #6
mjf is offline mjf  Austria
diyAudio Member
 
Join Date: Jan 2009
Location: Austria
hello.
siemens (= epcos) has petp caps.
mkh,silver coloured,without coating,lead dist. mostly 7,5mm,cheap.................
greetings.........
  Reply With Quote
Old 23rd June 2009, 09:05 PM   #7
diyAudio Member
 
Join Date: Sep 2005
Location: london
Hi analog Sa

the m caps I have are labelled as 'supreme silver', i dont think that is the silver/oil version but i am not sure??

The BG non polars cost a small fortune compared to the PETP's

I too have tried many of the military caps the teflons are not bad at all, overly smooth but still very good in my opinion.. The rest are not very good including the PIO's I see used regularly in diy project pictures.

Also i mentioned in another thread some time ago last year about starter motor caps used in washing machines 50uf for high voltage 400v application from Ducati energia.I have used these in many valve amp applications again i noted a quality akin to black gates but for a few uk pounds!!! compared to 100 for the black gates.
  Reply With Quote
Old 24th June 2009, 01:47 AM   #8
diyAudio Member
 
Join Date: Feb 2005
Location: Melbourne
I, too, have used the Motor-start caps particularly for speaker Xovers and p/s bipass - the NOS Rifa ones are better than the Ducati, if you can find them.
I have changed up from these (and Wima MKP-10s) to Clarity Caps, and then up to the present arrangement of AmpOhm PP plus red Jensens.
I didn't like the sound of the Blackgates either, in my setup and the dark green POIs that come with the Aikido kits retain a certain "choked off" characteristic that many people have found attractive.
Hopefully, these humble Petps will be a success in my system - they are quite cheap and with the combined freight, it turned out to be reasonable (from Ukraine to Oz, that is!)
__________________
... jh
  Reply With Quote
Old 24th June 2009, 09:55 PM   #9
jlsem is offline jlsem  United States
diyAudio Member
 
jlsem's Avatar
 
Join Date: Jun 2003
Location: Dallas,TX
Quote:
because polyethylene terephthalate is some type of polyester.
It is in fact MYLAR.

John
__________________
When an LP gets scratched it still makes sense; when CDs crack up they go completely senile and gibber incontinently. - Hugo Williams
  Reply With Quote
Old 25th June 2009, 02:06 PM   #10
oshifis is offline oshifis  Hungary
diyAudio Member
 
Join Date: Mar 2004
Location: Budapest, Hungary
They are all the same. Mylar is the trade name used by DuPont.
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
capacitors reddish75 Solid State 4 19th May 2008 11:16 AM
what is the difference between silver mica capacitors and ceramic capacitors ?? prorms Solid State 1 6th May 2008 01:38 PM
Continental Capacitors' "Type-A" oil-filled capacitors? radical Parts 0 21st October 2004 09:39 PM
capacitors: panasonic FC vs elna RJH vs rubycon ZA capacitors costiss Parts 11 30th January 2003 10:32 PM
differences between computer grade capacitors and small can capacitors LBHajdu Pass Labs 0 22nd February 2002 02:29 AM


New To Site? Need Help?

All times are GMT. The time now is 01:08 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2