Anyone broke down a balance cm2015?

Miedosoracing · 6th January 2006, 10:25 PM

I have been searching, and not found anyone who has, so just wondering if anyone knows if they are breakdown-able. I just picked up a new one from egay for $117+$8 shipping. So hopefully it will end up being a good deal. Anyone with some info???

Miedosoracing · 12th January 2006, 05:00 PM

Got it today, and broke it down in about 10 minutes. No fcc problems, mostly long wires actually. Great price for what i got. $126

snortonnorton · 13th January 2006, 01:31 AM

you're really really lucky.

i went through 4 lcd's (and i'm still waiting for one that is finally diy friendly)

what sucks is phillips makes a **** load of lcd's and it has the worst FFC problem.....

samnsung synmaster's are great but ironically they use a NASA quality foil adhesive that is so strong that it usually tears the delicate flappy circuits on the side of the lcd..

so you got super lucky man.

tk0896 · 1st February 2006, 03:41 PM

I am looking into picking up one of these. Do you have any pics of your setup or results?

thanks

Miedosoracing · 1st February 2006, 03:50 PM

I don't, I already have it set up on the board. I did remove the anti glare. I am still pondering taking off a second side, which has a reflective side. I am not sure if it will make everything white out, or make it work better. I will keep you updated on it. I do know that the lines are long enough to work with, but there is a board that is connected to the lcd. That one, I have mounted up against a L shaped board, so there is no movement. That one has fcc cables all the way across, so you don't want to mess that one up. It folds out nicely, but just do it once, because repeated time will surely break one. I am hoping to have it up and working in the next week or two.

6th January 2006, 10:25 PM	#1
Miedosoracing diyAudio Member Join Date: Oct 2005	Anyone broke down a balance cm2015? I have been searching, and not found anyone who has, so just wondering if anyone knows if they are breakdown-able. I just picked up a new one from egay for $117+$8 shipping. So hopefully it will end up being a good deal. Anyone with some info???

1st February 2006, 03:41 PM	#4
tk0896 diyAudio Member Join Date: Dec 2005 Location: N.C.	I am looking into picking up one of these. Do you have any pics of your setup or results? thanks __________________ do or do not, there is no try

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
I think I broke something	rx7speed	Solid State	6	24th January 2008 04:28 PM
Broke my Chip amp	pjpoes	Chip Amps	2	6th February 2007 10:43 PM
If it aint broke	digital desire	Solid State	10	27th November 2006 03:06 PM
Mailer broke?	mpmarino	Forum Problems	0	11th June 2006 01:42 AM
The movers broke my TV PLEASE HELP	HawkeyeStoob	Everything Else	2	1st May 2006 04:46 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

12th January 2006, 05:00 PM	#2
Miedosoracing diyAudio Member Join Date: Oct 2005	Got it today, and broke it down in about 10 minutes. No fcc problems, mostly long wires actually. Great price for what i got. $126

13th January 2006, 01:31 AM	#3
snortonnorton diyAudio Member Join Date: Dec 2005 Location: tallahassee	you're really really lucky. i went through 4 lcd's (and i'm still waiting for one that is finally diy friendly) what sucks is phillips makes a **** load of lcd's and it has the worst FFC problem..... samnsung synmaster's are great but ironically they use a NASA quality foil adhesive that is so strong that it usually tears the delicate flappy circuits on the side of the lcd.. so you got super lucky man.

1st February 2006, 03:50 PM	#5
Miedosoracing diyAudio Member Join Date: Oct 2005	I don't, I already have it set up on the board. I did remove the anti glare. I am still pondering taking off a second side, which has a reflective side. I am not sure if it will make everything white out, or make it work better. I will keep you updated on it. I do know that the lines are long enough to work with, but there is a board that is connected to the lcd. That one, I have mounted up against a L shaped board, so there is no movement. That one has fcc cables all the way across, so you don't want to mess that one up. It folds out nicely, but just do it once, because repeated time will surely break one. I am hoping to have it up and working in the next week or two.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)