entry level do-it-yourselfer joining..

jz23 · 6th April 2007, 05:37 AM

Hi everyone...my name is jimmy
I happen to just stumble on this site and found it very informative.

about me: im graduating as an Electrical engineering degree in may from Lamar University (beaumont texas). even with the schooling i 've recieved i still dont understand alot of things i have read here. i dont know whats going on, but thanks to this site, hopefully i will learn everything i need to know(which is alot). i find this site very interesting and do see myself fixing electronics for a living.

cowanrg · 6th April 2007, 06:41 AM

welcome! this site still overwhelms me with information and ive been on here for YEARS. good luck, and post tons of pictures of your projects!

Cal Weldon · 7th April 2007, 03:32 PM

Hi Jimmy and welcome to the forums.

6th April 2007, 05:37 AM	#1
jz23 diyAudio Member Join Date: Apr 2007	entry level do-it-yourselfer joining.. Hi everyone...my name is jimmy I happen to just stumble on this site and found it very informative. about me: im graduating as an Electrical engineering degree in may from Lamar University (beaumont texas). even with the schooling i 've recieved i still dont understand alot of things i have read here. i dont know whats going on, but thanks to this site, hopefully i will learn everything i need to know(which is alot). i find this site very interesting and do see myself fixing electronics for a living.

7th April 2007, 03:32 PM	#3
Cal Weldon Speakerholic diyAudio Moderator Join Date: Jan 2004 Location: British Columbia	Hi Jimmy and welcome to the forums. __________________ Next stop: Margaritaville Some of Cal's stuff \| Cal Weldon Consulting

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Entry level tube amp	augerpro	Tubes / Valves	36	9th October 2011 08:01 AM
If you need an entry level all-tube preamp...	Miles	Swap Meet	2	24th February 2011 11:18 PM
Entry Level Turntable	Telemin	Analogue Source	30	10th September 2009 10:06 PM
Looking for entry level oscilloscopes	dreamspy	Parts	2	2nd May 2009 06:04 AM
entry level velodyne	RockysDad	Subwoofers	3	18th December 2005 06:04 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

6th April 2007, 06:41 AM	#2
cowanrg diyAudio Member Join Date: Apr 2002 Location: Lafayette, CO	welcome! this site still overwhelms me with information and ive been on here for YEARS. good luck, and post tons of pictures of your projects!