Mas Metexas Charisma preamp manual - diyAudio
Go Back   Home > Forums > Member Areas > Introductions

Introductions Welcome to the DIYaudio Community. Introduce yourself here so we can get to know you better!

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 19th July 2014, 09:06 PM   #1
diyAudio Member
 
Join Date: Jan 2010
Default Mas Metexas Charisma preamp manual

I recently acquired a Mas Charisma 111 without instructions.
I would like to know how to set up its phono stage to best match my cartridge.
This preamplifier has two banks of 8 dip switches,accessed by unscrewing the lid.
The switches change capacitance ,resistance and gain for the phono stage.
Without instructions, what the switches do becomes very hard to figure out.
The preamp sounds a little dark and lacking top end sparkle.Hoping I can improve it.
Anyone had any experience with these units?
Switches 3 are both set to the on position,and I'm using an Ortofon Rondo Bronze MC cartridge.
And yes I downloaded the free manual from MAS website.It made no mention of the phono stage.In fact the whole download was useless.
Cheers
  Reply With Quote
Old 20th July 2014, 04:51 PM   #2
Speakerholic
diyAudio Moderator
 
Cal Weldon's Avatar
 
Join Date: Jan 2004
Location: Near Vancouver
Welcome to diyAudio. Maybe take this question over into one of the other forums, this intro area is where people say hi. Good luck with it.
__________________
Next stop: Margaritaville
Some of Cal's stuff | Cal Weldon Consulting
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
X-mas driver rebuild! Rewind Multi-Way 3 21st December 2013 10:21 AM
Anyone know about MAS CDT-1 Transport? JesseG Digital Source 1 29th February 2012 08:43 PM
X'mas & New Year Greetings takkiechu Introductions 0 10th December 2009 12:06 PM
Merry Aleph-X-Mas ! CheffDeGaar Pass Labs 43 5th January 2004 10:11 AM


New To Site? Need Help?

All times are GMT. The time now is 04:53 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2