diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Introductions (http://www.diyaudio.com/forums/introductions/)
-   -   keen newby (http://www.diyaudio.com/forums/introductions/222915-keen-newby.html)

patnut 5th November 2012 08:42 AM

keen newby
 
hi to all, i have been a long time audio fanatic with a fairly large collection of speakers, amps, subs, and all sorts that are forever getting me into trouble with my wife. i have a lot of ideas that are floating around which normally involve recycling some of the gear i have laying about, but i think i have lots to learn about modding.
i have been a member here for a little while, and im taking my first step by looking for advice, and hopefully some expertise. where do i start in the learning chain of electronics, and is it possible for a novice to learn.

Cal Weldon 6th November 2012 05:43 PM

Hi and welcome. Of course it's possible to learn. There are loads of persons here to help. What sort of plans do you have?

planet10 6th November 2012 06:29 PM

Welcome to the forum Pat.

dave

patnut 7th November 2012 07:04 PM

Quote:

Originally Posted by Cal Weldon (Post 3230917)
Hi and welcome. Of course it's possible to learn. There are loads of persons here to help. What sort of plans do you have?

probably a huge step to start with, but i have a kenwood krv9080 which has loads of power, but i want to build a power amp using this as a base.

picowallspeaker 7th November 2012 07:18 PM

Good : usually is the preamp section that is not adequate; also the electronic input selector is not very good . Less is better


All times are GMT. The time now is 02:30 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2